Search results

  1. V

    Cycle Analyst V3 preview and first beta release

    Having a weird issue with the trike setup. It's the prodecotech sensor and a cadence sensor wired together to give a valid torque reading and cadence and has been working great. Yesterday it started dropping out at times and it definitely had valid human watts and cadence signals while not...
  2. V

    Cycle Analyst V3 preview and first beta release

    You can use a cadence sensor alone with pas but not in torque mode. The settings are a little confusing and somewhere I know Grin answered me about this but there is a way to have more assist at lower cadence. Try the throt pas mode and play with the settings. Throt pas will give more power at...
  3. V

    Cycle Analyst V3 preview and first beta release

    Since I posted I did notice that a long hold goes to max, that is actually pretty helpful. I think the other comment about precision vs max power sums it up very well. On the low end you want small steps so you’re at a happy level of work vs assist but on the high end if you’re already at 3x...
  4. V

    Cycle Analyst V3 preview and first beta release

    I'm not sure if this is practical but have you guys thought about having a sort of log step mode for the digital aux? It might just be my situation and not something that would be useful widely but in a torque sensor setup, small assist at the bottom end and larger assist at the top end seems...
  5. V

    BEAMts Torque Sensor...Figured it out!

    Here's some build info and pics https://endless-sphere.com/forums/viewtopic.php?f=6&t=94410&p=1382414#p1382414
  6. V

    TerraTrike Sportster EZEE Hub motor conversion

    Couple of pics I forgot, the CA wiring inside and the bits you get to remove if you take off the aux harness. This also removes the need for the ebrake plug male and female and the aux plug, those wires are being fed straight into the CA so it's cleaner but possibly less easy to service if the...
  7. V

    TerraTrike Sportster EZEE Hub motor conversion

    Figured I'd post up some pics since I had trouble finding much about terratrike conversions, especially hub motors. Selected the ezee from Grin (great service and support!) because the main goal here is hill climbing assist and it's geared and has a reasonable weight and output. Also the...
  8. V

    BEAMts Torque Sensor...Figured it out!

    Thanks guys! I'll try to post up some build pics when I have a few mins. For the settings you can start by setting the sempu and then change the type to custom trq, this will get you set as 24 poles, 2 wire, reverse polarity. Currently I have 15.0 Nm/V set, I hung an 8 kilo vise on the crank...
  9. V

    BEAMts Torque Sensor...Figured it out!

    I know these are not really available but I got lucky and found one locally. It’s the prodecotech version and mounted it on a tadpole trike and hooked to cycle analyst. It’s easy to wire to the throttle but you can’t configure anything so I got a 24 pole slim pas sensor from grin and added the...
  10. V

    Sempu BB + cycle analyst assist not working well

    When I'm in the settings looking at the voltage and torque readings from the sensor, it looks pretty linear (granted I have no experience here) as in when I press harder the torque ramps up reasonably. It's interesting, when you take your feet off the pedals it will read a pretty steady 1.51v...
  11. V

    Sempu BB + cycle analyst assist not working well

    After going through the settings and with help from Grin, it is working intermittently now. When I start out, the human watts will read negative for about half a block and then will suddenly kick over to positive and assist will work well until I stop. Anytime I slow down to a near stop or...
  12. V

    Sempu BB + cycle analyst assist not working well

    Hi guys, I am working on a trike conversion for my wife who has some orthopedic issues and could use some hill assist. Have ezee hub motor, CA 3.1 and phaserunner, and sempu torque sensor. Having some random issues with the human watts being detected as negative and then as I pedal harder going...
Back
Top