Search results

Date Relevance Most replies

  1. stripedtuna

    Classic MAC Motor With Halls—What KT Controller?

    Hi Degull. Did you ever end up getting pas to work with the Mac 8t? I have a bike which has an 8T Mac motor with the upgraded phase wires (two wires per phase). 12 Fet controller, and cell_man's 52V triangle battery from 2012. All from cell_man. Loved it. But since moving interstate, and years...
  2. stripedtuna

    Mac, Triangle A123, Giant Hardtail Commuter - 1st build

    Its an 8T motor with the upgraded phase wires (two wires per phase). 12 Fet controller, and cell_man's 52V triangle battery. I havent played much on the bike recently, but from memory (and i really could be wrong about this and wont know till i take it out for a spin) the current draw is...
  3. stripedtuna

    Another stolen bike.

    Spybike by integrated trackers would have possibly helped get the bike back.
  4. stripedtuna

    which replacement part for unknown fet?

    Sorry mate.. Never got back around to fixing it yet.. I bought the spare fets, but fitted a Mac kit to my bike, and just never got around to fixing this little controller. Might start to look for another bike to motivate me . Good luck with yours though.. Ed.
  5. stripedtuna

    replacing dead hall in a MAC

    That makes total sense Dnum... I havent had a breakdown yet on my first and only bike, but i have learnt from your input to this thread. Totally agree to test while motor still assembled. Cheers, Ed.
  6. stripedtuna

    replacing dead hall in a MAC

    half way down this page: http://www.electronicspoint.com/want-test-hall-effect-sensor-t218999.html The moderator mentions this: ************************************************** Quote: Originally Posted by slim_jim_56 View Post I was wondering if any one knew of a simple circuit for testing...
  7. stripedtuna

    replacing dead hall in a MAC

    This tester wont help you with the plug full of silicon, but certainly makes testing e-bikes (including halls, throttles and more..) much easier and quicker. Everything the tester does, can be done using a multi meter, but IMHO the tester makes testing quick and simple. I think you would still...
  8. stripedtuna

    Raleigh MTB with MAC 500W & fibreglass panels (AUS)

    Go the Mighty Mac !!! 2000 kms and still going strong is awesome. I wonder what the typical life span is for these motors. Mine is up to 450kms and used around 100Ah so far. Very very happy with it. I looked at my rear tyre, (cos id spaced mine similar to yours) and didnt notice extra wear...
  9. stripedtuna

    Using light power output from Cycle Analyst question.

    I havent made the change yet but from what I have read from Justin, who knows the CA best, you have to make sure that the direct plug is wired correctly to the inside of the controller. Some controllers dont have the wires on the correct side of the shunt, thus causing the neg readings.. Doesnt...
  10. stripedtuna

    Using light power output from Cycle Analyst question.

    Thanks for that Wayne, thats exactly what i was told and what the pic Justin sent me shows.. If you had to make those changes, wouldn't the shunt value change, thus needing to re measure the shunt value for the CA settings? Does anyone have the instructions or a link to the best forum post...
  11. stripedtuna

    Using light power output from Cycle Analyst question.

    Gday Scruff, I havent sorted mine yet, as it is doing no harm. I will get to it next time i need to pull things apart. Just saw your build thread.. What a beast.. Awesome bike mate.. Anyway, Justin wrote: " You need to make sure that both the black and the white leads are soldered to the...
  12. stripedtuna

    First Build with my own three hands

    Awesome trike.. I love it... I have read that the spark can ruin battery connections over time and also up the risk of controller damage. Not sure from experience though, as my cell_man battery came with a precharge resistor circuit built in, which charges the controller capacitors first...
  13. stripedtuna

    Not being able to drive smoothly at half speed MAC

    I have the 8T and cell_man's 12 Fet. It can smoothly take off and cruise at walking speed. I use only the first and second positions of the 3 speed switch, and find the throttle to be very nice.. Lots of control and steps up in gradual increments.. You wont regret it ..
  14. stripedtuna

    Oil cooling your hub- NOT snake oil!

    Funny stuff.. lol.. I just took a quick look to see the difference between the old and the new. Side by side, you can really see the sun tan you gave it.. lol. Awesome...
  15. stripedtuna

    Using light power output from Cycle Analyst question.

    Thanks heaps for the reply Amberwolf. I just got a reply from Justin (ebikes.ca) with the exact info you mentioned. So you were spot on. I wasn't exactly sure what you meant when you said the 'CA power tap' but saw a good picture in Justin's email that cleared it all up. Thanks again...
  16. stripedtuna

    Using light power output from Cycle Analyst question.

    Hi everyone, I wired up my bike lights last night, as daylight saving finished and the commute is getting pretty dark after work. I used the Auxillary power output lead from the cycle analyst, then a step down dc - dc, then the 8.4V steady output to the bike light. The light only has power when...
  17. stripedtuna

    I just went from a 6 turn to an 8 turn Mac

    Hi everyone.. I use my 8T for a fairly flat commute to work, and love it.. Most people have talked about how good these motors go when you want to accelerate fast and get high speeds (and i agree totally) , but i just wanted to also state how happy i was with its smooth operation at low speeds...
  18. stripedtuna

    E-Bike for Rippers

    Nope.. My bike doesn't do that.. But i did enjoy watching your video.. It reminded me of a downhill race video that i saw a while back, non electric, but was a good vid to watch. zr_pO9DTJpM Cheers..
  19. stripedtuna

    Cycle Analyst V3 preview and first beta release

    Awesome product mate.. Sorry if this has been asked before, but is the output voltage of the cable for powering lights on the handlebars configurable via the CA? As in the cable for powering my front lights on my bike. I am about to wire up the front lights on my first e-bike, and when i...
  20. stripedtuna

    Mac, Triangle A123, Giant Hardtail Commuter - 1st build

    Thanks heaps for that Susan and Knoxie.. Cheers also for the sound advice. I like to pedal, and accelerate with trying to keep under 1000 watts. ie. gradually. In my opinion, the bike is an absolute beast of a commuter. I hated riding into head winds before, and later in the week the slight up...
  21. stripedtuna

    Mac, Triangle A123, Giant Hardtail Commuter - 1st build

    Here is the perspex job i did to hide the controller, and also to show my flying pig decals..
  22. stripedtuna

    Mac, Triangle A123, Giant Hardtail Commuter - 1st build

    Hi Rob, wish I could help ya mate. But I (stupidly) buried the programming cable plug under all those layers of tape and rubber underneath. I got so carried away with taping up my excess cable, that I forgot to leave the programming plug out. There is that much tape, that i figured i will get...
  23. stripedtuna

    Lucent NP1200 48-56V Power Supply - charger??

    Lol.. Thanks heaps for that info.. I actually have a proper 6A charger from cell_man, but considered getting the lucent power supply (if it was suitable) as a backup. I wasnt sure if it would be useful so i let the auction go.. I did however have a bid to $21 just in case, but the other guy...
  24. stripedtuna

    Mac, Triangle A123, Giant Hardtail Commuter - 1st build

    Thanks Stu,, I finally figured out how to upload a video.. Not hard now that i know how.. Now i just have to take better footage.. I think i have the camera mounted a bit better for my next go. I have packed the mount beter with non slip stuff, and strapped it down better... cheers, Ed.
  25. stripedtuna

    Lucent NP1200 48-56V Power Supply - charger??

    Hi everyone, can a Lucent NP1200 48-56V Power Supply (1200W) be turned into a charger for a 52V lifepo4 battery pack? Cheers, Ed.
Back
Top