Search results

Date Relevance Most replies

  1. C

    Yamaha YZF R1 5VY Conversion

    How did this go? My 01 r1 threw a piston last year and I've been considering something similar after building a qulbix raptor up to 25kw and needing more battery capacity and frame space.
  2. C

    Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

    Has anyone messed around with unlocking the max voltage on these conrollers? Kind of missing a lot of my battery capacity (24S) after switching from old EM3EV controller. I can't even charge my battery up to 4V a cell now :cry:
  3. C

    PV NextGen FOC 100-180v 36kw max - $799

    Exactly. Stop skimping on the extreme basics like seriously. I only trust the gaskets after I silicone them but it's nice to have a firm object to tell when the end caps are being properly torqued down against a double silicone seal on either side of the sturdier gasket. This is the way that you...
  4. C

    PV NextGen FOC 100-180v 36kw max - $799

    I love how you keep posting and wont respond to any of my requests to get my items back from you. You've had them for over a year!
  5. C

    PV NextGen FOC 100-180v 36kw max - $799

    They most certainly do need them there is no difference in how they mount at all vs smaller controller cases. And if they dont need them why did you put one in one of two sides? Why even waste the gasket? Can anyone confirm that this is "standard practice" or are you just trying to cover the...
  6. C

    PV NextGen FOC 100-180v 36kw max - $799

    It's kind of expected to put a gasket at each end of a $500 controller when even Chinese kids can remember to put the little rubbers in $20 Chinese controllers. One gasket on just the wire side, which faces down anyways, is absolutely ridiculous! That's what I call either forgetful or not...
  7. C

    PV NextGen FOC 100-180v 36kw max - $799

    Admits that he doesn't waterproof the controllers he sold me as waterproof. He literally doesn't care cuz I used to live in CA. Guess what? People live in other places... wooooo
  8. C

    PV NextGen FOC 100-180v 36kw max - $799

    There's a difference between having gaskets all around and forgetting one of the end cap gaskets before controller shipment that irks me. You got half it right...
  9. C

    PV NextGen FOC 100-180v 36kw max - $799

    I really love this... I kinda wanna do this then mount each boot slightly off a 90 angle so at speed they would be equally "in the windstream." One of my main concerns now is at over 70+mph if there is moisture that it will be forced into cavities unless properly vented into the surrounding...
  10. C

    PV NextGen FOC 100-180v 36kw max - $799

    +1 for inadequate weather proofing. Controller was no where near "sealed" upon further inspection
  11. C

    PV NextGen FOC 100-180v 36kw max - $799

    Getting kind of sick of the overplayed tester/dealer relationship for these controllers. Glad I got my money back at this point but looks like I'm not the only one with issues which is good to know. Also for electricgod, would like my parts back that you said you'd fix. Please and thanks
  12. C

    PV NextGen FOC 100-180v 36kw max - $799

    Where is it cuz that's the chip. And by the way electric God where is all the stuff I sent you? You've gone AWOL on my requested repairs
  13. C

    PV NextGen FOC 100-180v 36kw max - $799

    Temp over cycle analyst connector? What kind of stuff you smoking. Cycle analyst has 6 pins. You should go check the pinouts as none of those six are a temp sensor and either way temp sensor from motor needs to come from the motor and the cycle analysts only connection is via the controller. Do...
  14. C

    PV NextGen FOC 100-180v 36kw max - $799

    That last chip was the one that was sent to me. It only has one temp input. And powervelocity said any other "open ports" were under development, aka no dual temp sensor inputs as far as I can see. Also not user error when a key component in fault detection was failed before arrival. Failed temp...
  15. C

    PV NextGen FOC 100-180v 36kw max - $799

    The module i was sent for my 100V 20kw PV controller had the temp sensor from the controller hooked up to the only temp input on the Bluetooth module I was sent. kinda hard to plug two temp sensors into the same input! even if you did manage they would show up as either a series or paralled...
  16. C

    PV NextGen FOC 100-180v 36kw max - $799

    How do you read motor temp when the seller didnt have any point on BT module for input nor would advise on it? Coming from experience of returned controller due to heavy flaws like the onboard temp sensor being DOA. No temps displayed was even more fun
  17. C

    PV NextGen FOC 100-180v 36kw max - $799

    Also it's nice to be able to read motor temp. Not just controller temp!
  18. C

    PV NextGen FOC 100-180v 36kw max - $799

    One more thing to charge, turn on, and have connectivity issues with. Also almost always harder to see under bright sunlight also. Hardwired has peace of mind. That some bluetooth glitch isnt going to leave you stranded or the likes. Had quite a few dropped bluetooth handshakes with a new...
  19. C

    PV NextGen FOC 100-180v 36kw max - $799

    Where can I send preorder payment?
  20. C

    Phase/Hall Troubleshooting

    Awesome Sauce! thanks buddy much appreciated for the info. will do some test riding tonight with that combo and post back about my results. if anyone else has had this happen plz chime in also!
  21. C

    Phase/Hall Troubleshooting

    Got a bit of a headscratcher here now today folks. has anyone had four "valid" combinations? I have two that run at 30 mph with a 2.9amp draw coming from the battery, one at 2.5/30mph which i think is the right one? but then i have one that pulls 18 amps but goes 60 mph??? anyone seen this type...
  22. C

    5V Light flashing

    Having some issues with two brand new controllers from em3ev that I need help diagnosing. No matter what type of pack or settings I try to run I cannot seem to get either the 6 fet sensored or sensorless version to work. have only gotten one 6 fet sensored to work out of the three originally...
  23. C

    Increase regen/braking strength with CA3?

    which wires did you splice exactly? and were you able to get proportional regen or just one setting regen to work after this mod?
  24. C

    WHERE ARE YOU DILLENGER!

    you never will... well actually you might but it wont last long if it does... had to buy back the bike from the guy and its a joke. they said they put a 1000w kit on it. definetely still 750.... and the frame isnt even meant for this type of thing. we had to put torque arms on both sides as it...
  25. C

    WHERE ARE YOU DILLENGER!

    Im sure their kits work phenomenally.... until they dont work anymore and then good luck sailing up shit creek with no paddles or sails. Will message Hyena and see whats up. Pretty dismayed at their response still and that the boss decided to take such a loss by buying the crap bike off the guy...
Top