• Howdy! we're looking for donations to finish custom knowledgebase software for this forum. Please see our Funding drive thread

Search results

  1. G

    Plastic gears for cyclone motor

    District prawn how are those plastic gears working now ? Did they last and at what power ?
  2. G

    new cyclone 3000 w mid-drive kit?

    This c3000w mid drive kit is still probably the best high power mid kit if only it was put together better than cyclone straps and flimsey mount plates... it's a lot more powerful than a bbshd. It's a lot quieter than the CYC ...and it's lighter and more compact than the Lightning rod.. and...
  3. G

    107mph go kart on 28S/18P pack of Molicel P26A

    What is the peak power you are running ?
  4. G

    aft 1680

    10,000 km and no wear on the gearbox ? That's awesome compared to the all the tangent gearbox failures on here I think you did well on your choice so the oil in their and magnets seem to help as I recall the original cyclone gearboxes with grease wear out very fast . Or maybe it's hardened...
  5. G

    aft 1680

    Cool so how many km on this build? So no wear on gearbox most online wear out fast with grease did you put the oil Inside it ? Do those magnets work
  6. G

    Cyclone 650w-1680W up to 60v @2100W without overheating

    Best you copy what AFT ebike did with the mini cyclone at that power gears are in oil bath and I think they used hardened gears
  7. G

    GreenMachine allMod aftCycloneVz DaveRc Tangent astro 3220

    Sorry to here what is wrong health issue or covid related ? And yes keep your chin up whilst popping a mono on your ebike :)
  8. G

    GNG / CYC X1 Pro 3000w

    What price to be people pay for this posted ? Does this have trumps 25pcnt import tariff ?
  9. G

    GNG / CYC X1 Pro 3000w

    Hi Does anyone have the full motor specs to be able to put on the motor comparison spreadsheet ? What is the rotor size and how does it compare to the cyclone mini that is also around 3000w at 48v. KV seems to be the same around 150v. is this a 4 pole inrunner ? and will it run on a normal...
  10. G

    bluetooth BMS?

    For rhe wireing its just wired like two separate batts. The only connection between the batts is the main output plus and minus. The reason i have it liue this is that sometimes i use the batts at 36v. The bms normally only see 36v. And everything has been working fine for a while, its just...
  11. G

    bluetooth BMS?

    I have the xiaoxing bluetooth bms. But i have two 10s bms wired in series for 84v peak. Everything has been working fine for a while... but today on the way home... right at the end one batt cutout on low voltage... but i continued on for a little bit at low power i.e 30v and got the dreaded...
  12. G

    Cycle Analyst V3 preview and first beta release

    Justin 470 uf across ca input wire fixed it ! Like u said maybe low caps on controller was causing interference??? I put a 800ohm resist inline and problem came back ! So just left the cap and problem solved thanks !
  13. G

    Cycle Analyst V3 preview and first beta release

    Hi just tried the light plugged into ca and see video attached light doesnt blink ! Also i dont think its the throttle wire that runs through ca as i ran an auxiliary battery pack to run ca and that is the only time ca didnt trip. For wireing its standard from the shunt. And one wire...
  14. G

    Cycle Analyst V3 preview and first beta release

    Here is a video... whats wrong with this ca ? Voltage sags only to 22v from 24v and throttle doesnt even go yellow under load or cut out. Only the ca restarts ? If i throttle gradually it gets to full power 650w.. only when i do it fast it cuts out...
  15. G

    Cycle Analyst V3 preview and first beta release

    The thing is on the cav3 display voltage is not sagging below 22v. Also in the throttle that doesnt shut down it doesnt go red or show lvc cut out as it can. Its only the cav3 that cuts out and restarts when connected to main pack. If i run ca to a dummy 20v pack it stops this problem... it...
  16. G

    Cycle Analyst V3 preview and first beta release

    But does low volts cause CA to shut down and reboot ? It has a throttle plugged in and that does not cut out hence i thought its the cav3 ? Do bms cut out so quick ? The thing is i also tried to run the main pack input of a 2nd battery with higher amp cutout and it still did it ? Hence why i...
  17. G

    Cycle Analyst V3 preview and first beta release

    I have a cav3 running it on a 24v 500w motor and it has a strange problem the screen cutsout and resets and restarts and high load around 8-900w only. its not the battery BMS cutting out because I added an auxiliary battery in parallel to run the cav3 and it would not cut out when run like...
  18. G

    bluetooth BMS?

    Hi I have this BMS, but I am not sure if I have set the BMS values right as it seems to cut off early when one cell hits 4.2v but them immediately the pack stops charging and seems to end up under 41v. This is a 10S Lion pack so should charge to 41.5 to 42v . Is their something I need to...
  19. G

    Specialized Epic Expert FS Frame for HD1000

    https://endless-sphere.com/forums/viewtopic.php?f=28&t=83578 this build thread is best one i have seen with a cyclone inside the frame makeing it the ultimate conversion .. he has done dozens of builds before it ..power with quietness unlike the tangent
  20. G

    Best new cells or comeing ? better than the 30Q 15amp cell or LGmj1 10amp cells

    i need a 15amp cell is their anything better than the 30q cell?
  21. G

    Best new cells or comeing ? better than the 30Q 15amp cell or LGmj1 10amp cells

    Is their anything newer or better than the 30Q 15amp cell or LGmj1 10amp cells these cells are getting quite old and am wondering what better is comeing ? or are all the new cells 21700 format ?
  22. G

    GreenMachine allMod aftCycloneVz DaveRc Tangent astro 3220

    What voltage and current do you run your cyclone that it is so fast vs the tangent voltage and current ?
  23. G

    Sur-Ron - New Mid drive Bike

    cool video but where is all the gear or chain whine comeing from ? this diffinetly sounds louder than a hub or even the c3000w mid drives ? it could be that the belt or chain is doing all the high rpm reduction as their is no gearbox. whereas on the c3000w type mid drive ebikes its done inside...
  24. G

    DH dual motor = LR mid drive + Grin all-axle front hub

    So the 5KW big block is too much power and the bafang 750w is not enough, and you needed a torque throttle controller not cheap greentech or Lyen, well that's pretty much exactly the original kit you were thinking of using isn't it the AFT 1680w ? as that kit power is right in the middle of...
  25. G

    Dave's 80:1 RC mid drive kit build log

    Thats a good point, how do you repair or rebuild the gearbox and what life does it have ? i have seen the AFT kit gears last over 5000 km and then its a cheap $30 USD set of planetary gears. The belt drive kits like LR not sure how long the belt lasts? but i am guessing they are very cheap to...
Back
Top