Search results

  1. V

    User profiles (BBS02B, BBSHD) for BBS-FW (Daniel Nilsson's Open Source Firmware)

    Have you tried to reflash? It's possible you missed any parameter out when flashed new 1.4. Did you checked properly red mark parameters?
  2. V

    User profiles (BBS02B, BBSHD) for BBS-FW (Daniel Nilsson's Open Source Firmware)

    Yup, software lets you load and extract all config using files like I've provided. It may be compatible with latest 1.4.0 firmware. About power control, take in mind this motor doesn't have any torque sensor (motor only measures if pedals are spinning, not the pressure applied on it). Someone...
  3. V

    User profiles (BBS02B, BBSHD) for BBS-FW (Daniel Nilsson's Open Source Firmware)

    Done! There was a less limit when I created this thread (I'd tried to upload a .zip file containing all profiles but I wasn't allowed), it seems more reasonable right now!
  4. V

    User profiles (BBS02B, BBSHD) for BBS-FW (Daniel Nilsson's Open Source Firmware)

    sorry bro but i've lost it. I've uploaded more profiles and because there's a limit of files, i'd rather to delete this excel file
  5. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    At least, to compile this firmware (just an .hex file for an specific motor) and Windows software (.exe), I'm using Make software to obtain firmware file and Visual Studio (latest and free version) to obtain executable toolkit. Use of make (FW File): Download latest code from github in .zip...
  6. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Thanks for warning, it happened to me for 2nd time and therefore it's now fixed (I was using the dirty folder to compile the bbs02 firmware before bbshd, and .make software was using the first bbshd code despite I've declared bbs02, from now on I'll use twice clean firmware folders to compile...
  7. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Please use translator next time. It works with all controllers shown in main Github site There are 2 .hex files for each motor (bbs02b and bbshd), you need to flash at 20.000Mhz using the flashing guide parameters
  8. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Compiled last 1.4.0 firmware and tool today (8 jun 2023), named as "Beta 2". I hope this time BBSHD fw is the right binary Edit: because I was compiling it wrong, there was 2 identical firmware binaries (BBSHD is this post, BBS02 in previous), it's now fixed and each FW must be the right one
  9. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    did you turn off battery power and then turn on? It's necessary when you are in this step
  10. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Not the same problem for me in my 750c display, it works well and I've not experienced anymore the 0v start bug or a momentary power loss. It may be necessary calibrate voltage with config tool (I've calibrated mine using display voltage read in full battery). If it doesn't work after...
  11. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Firmware 1.4.0 beta compiled from source: New: More options for switch normal/sport mode. You can now use light on+PAS 0-9 (not only PAS0), it also can be set braking at boot for starting in sports mode. Hope in the future we can use more advanced ways alike brake on boot + light in PASX, or...
  12. V

    User profiles (BBS02B, BBSHD) for BBS-FW (Daniel Nilsson's Open Source Firmware)

    That's true, for me it's the best mode to keep illumination system functional Updated my profile to V5 - this time I've limitated PAS power to 70% in PAS9 (actually I use 6 levels system, for me is PAS6) I've done it cause having higher PAS levels can be dangerous and is not neccesary for this...
  13. V

    BBSHD or 02 on bike with internal cable routing?

    In my bike I'd the same trouble, what I've done is measure and cut the cable at right lenght, route it (using a cable-guide for home electric wires, also routed a 4-pin cable for front light and another future use alike 5v USB), solder it (there are 8 or 9 cables, all colored different so...
  14. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    1/It's well explained in gitgub (keep in mind there's NO EASY ROLLBACK TO ORIGINAL FW): Flashing the Firmware 2/The display doesn't communicate with controller as well as it can be (is not as smarter that can read all levels you actually used and discard not used, in my opinion too basic for...
  15. V

    User profiles (BBS02B, BBSHD) for BBS-FW (Daniel Nilsson's Open Source Firmware)

    Updated my profile to v4 with some power-cadence improvement in mid-levels, and more usefull less-power levels
  16. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    1/ Yes, the cable works as before, so the official software tool will not work, just usethe tool provided in the .zip 2/ Try to find a PDF/specs sheet, in my case (750c), for example level 5 remaps lv1(controller)->2(display), lv3->2, lv5->3, lv7->4, lv9->5. If not, it may be 1->1, 2->2, 3->3...
  17. V

    User profiles (BBS02B, BBSHD) for BBS-FW (Daniel Nilsson's Open Source Firmware)

    Hi mates. I'm making this thread just for sharing user profiles for BAFANG (or Luna or 8FUN mid-drives, it's the same but just rebranded) motors. This post is oriented only for BBS02B (500/750w) and BBSHD (1000w) (and maybe the Tongsheng motor running this firmware), in essence every...
  18. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    My 750C haven't neither any option related. I didn't test to change the startup mode, but I wonder it's defined by the display. So next time I flash, I'll test it
  19. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    What's ur display model? Maybe it's because the display set it at 1 (overriding the controller config, take in mind what defines the asist level to use is actually the display, not the controller). Life with it or try another display
  20. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Shift sensor is not working for me, as some users. Daniel said he doesn't use it and will not implement by himself (I think another programmer merged the code just for having it work, but as you can see, it does not work yet) Maybe you can buy or adapt that sensor to work as a simulated brake...
  21. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    I don't speak french, but translator told me about a "Offset sensor", which doesn't need a solution... Maybe you're referring about shift sensor?
  22. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    At the moment it seems not possible for BBS02B. If you install this fw there's no easy rollback -for the moment- cause the flash tool doesn't have read/dump functionality If you need a guide, in github site it's explained (in my point of view it's made as less for intermediate-level users with...
  23. V

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Hi mates. I'm owner of an BBS02B (750W, 48V battery 20ah/h Samsung cells, MCU IAP15F2K61S2). Bought on Amazon it came with original fw 1.7.5 (I think, not really sure so I actually didn't take note about this before flashing this custom FW). Shift sensor is not working for me in 1.2.0 alike...
Back
Top