Search results

Date Relevance Most replies

  1. michaelkramer11

    Cycle Analyst V3 Please Help

    I suppose I can do that. Figured i'd try to find someone with a similar problem or knowledge of this problem before looking over the pcb but that probably is a good idea.
  2. michaelkramer11

    Cycle Analyst V3 Please Help

    Pretty sure the screen isn't the problem. Half of the time it works perfectly. Some of the time, after working fine for 10 minutes it will begin to flash random characters on the screen or just display totally random stuff or nothing it all. But the problem absolutely happens when i plug...
  3. michaelkramer11

    Cycle Analyst V3 Please Help

    I posted this in another forum but didn't get any traction. Hoping this will be a better place. I've been looking for an answer to this problem for a while so any/all help is greatly appreciated. Sorry if this has been mentioned or discussed before, but i've been dealing with this problem...
  4. michaelkramer11

    Cycle Analyst V3 preview and first beta release

    Please Help?! Sorry if this has been mentioned or discussed before, but i've been dealing with this problem for years and i've finally decided to look for answers. I got my cav3 dp back in 2014 and for as long as I can remember I've had sporadic screen cutouts/random characters flash on the...
  5. michaelkramer11

    Are 3.7 8ah LiPo batteries 25c 200A super cells good for ebike

    How did you attach wires to these cells/the cells to eachother? Did soldering work normally? Hardware (nuts/bolts)? Spot welding? They're way cheaper than buying any new lipo packs and I'm just wondering how tough they are to actually make into a pack.
  6. michaelkramer11

    Yescomusa.com 500 & 1000 watt 48v rear kit review

    Did you hook the two meanwells up in series? IF so, did you put any special diodes or anything inline with the output?
  7. michaelkramer11

    electronics to convert Meanwell HLG supply into a charger

    What diode are you using on the output? I think I may leave the supplies hooked up all the time so i dont have to worry an open connector at pack voltage.
  8. michaelkramer11

    Cycle Analyst V3 preview and first beta release

    Hey guys, Just got my cav3 dp installed and love it. I'm using the pass through throttle mode most of the time. One feature that I came to love on my Infineon type controller was the momentary switch activated cruise control. Is there any way to use the ca to have this same capability? I...
  9. michaelkramer11

    "True" Power Rating of 48V1000W Yescom Kit

    Does anyone know how many magnet/poles are in this yescom 1000w rear motor? Need to know so I can properly set up my cav3 to properly read the speed via the hall sensors. Thanks!!
  10. michaelkramer11

    The ultimate onboard charging solution

    Do you have to plug in the connectors from each charger to each bank every time you charge?
  11. michaelkramer11

    The ultimate onboard charging solution

    Awesome! Thats one way to do it. I guess the only thing I wouldn't like about that method is that the separate banks may charge unevenly and you'd have to monitor two "packs" instead of one. Although one should be able to get the charge currents and voltages pretty close.
  12. michaelkramer11

    The ultimate onboard charging solution

    Any chance you can post a "schematic for dummies" drawing on how to run these safely in series and explain what the diodes do and what they are needed for? And also maybe a link to the diodes so I can purchase some? I've been using one Meanwell and having to break the pack in half but it would...
  13. michaelkramer11

    HLG Meanwells in Series, Cycle Analyst Help Needed

    Great Info! I guess I just need to do some research on the CAV3 and figure out how to wire that up. As far as the meanwells in series, i know ive seen a few people talk about installing diodes, but i've also read that these HLG models are already isolated and really dont require any special...
  14. michaelkramer11

    HLG Meanwells in Series, Cycle Analyst Help Needed

    Alright guys, I know this info is out there, but I'm not understanding exactly what I need to make this work. Goal: Easily charge my 16s 15ah Lipo pack with two hlg meanwells in series through a Cycle Analyst to show charge details. It would be nice to hop off the bike and just plug a cable...
  15. michaelkramer11

    electronics to convert Meanwell HLG supply into a charger

    Can you supply a link to the diodes you are using? I eventually want to charge with the power supplies in series and run through a cycle analyst as well.
  16. michaelkramer11

    electronics to convert Meanwell HLG supply into a charger

    HeathYoung, It sure seems like you know quite a bit about wiring these hlg's up in series to bulk charge lipo's. The pack i've got is a 16s15ah made from the hardcase lipo's. Anyways, i've been breaking the pack down into an 8s30ah pack to bulk charge with an HLG-320H-36a meanwell led power...
  17. michaelkramer11

    4500+ Miles US Ebike Tour - August 2014

    Awesome trip!!! Wishing you the best of luck and just added you on FB to try to keep up. Safe travels!
  18. michaelkramer11

    |Campus Rider MK I.5| Weld-free Electric Long Board

    Anyone planning on getting any of these cut and milled? I'd be interested in a set if anyone is.
  19. michaelkramer11

    3 * 12v/7.2Ah for an amped kit?

    What part of Texas are you in? There are tons of threads on the different battery types and the dangers and benefits of each chemistry: http://endless-sphere.com/forums/viewtopic.php?f=14&t=26621 I got my ebike going a few months ago and I imagine I'll have one for the rest of my life. They...
  20. michaelkramer11

    Yescomusa.com 500 & 1000 watt 48v rear kit review

    Man, I didn't realize these cheap(er) clones and an adjustable current limit. Thats AWESOME!!!
  21. michaelkramer11

    |Campus Rider MK I.5| Weld-free Electric Long Board

    Awesome designs! Keep us updated and can't wait to see those plans!
  22. michaelkramer11

    By far the cheapest LiPo. 3WH/$1. Turnigy 4s 5000mah at $24

    I ordered 14 of these packs from the USA warehouse about a month ago. 13 out of the 14 were in good shape (haven't really had them long enough to determine much). 1 of the packs did have a failure. The tab on one of the end cells with the positive discharge wire on it was cracked right next...
  23. michaelkramer11

    600W 0-66V 0-10 A curr and Volt adjustable charger for 120$

    Did anyone every try one of these out!?!?!?!
  24. michaelkramer11

    Yescomusa.com 500 & 1000 watt 48v rear kit review

    Thanks for the awesome info and updates! How are you regulating/limiting charge current on those clone meanwells?
  25. michaelkramer11

    Greentime controllers

    I did measure the current while riding. I repeatedly went to full throttle at each setting,along sure to put the max load on the motor.
Back
Top