CrawlingWhisper
10 mW
Hello,
I finally finished my first E-Bike Build. Maybe I'll post pictures later on. While everything is running, I have one concern. For my build I used this Bike, with an aluminium frame (the largest size option):
https://www.fahrrad.de/cube-curve-pro-limenblack-540066.html
I run a Mac 10T hub motor on 52V 30Amp (1560W) and use one GrinTech Rev4 torque Arm:
https://em3ev.com/shop/grin-tech-torque-arm/
Is it OK to run the build with only one torque arm ? If not, is it OK to do so on 52V 24A (that's what I originally planed) ? Will there be any negative long term effects on the frame ?
I don't know if it has any major impact but here in cologne it's about 0°C (32°F) at the moment.
Thanks
Felix
I finally finished my first E-Bike Build. Maybe I'll post pictures later on. While everything is running, I have one concern. For my build I used this Bike, with an aluminium frame (the largest size option):
https://www.fahrrad.de/cube-curve-pro-limenblack-540066.html
I run a Mac 10T hub motor on 52V 30Amp (1560W) and use one GrinTech Rev4 torque Arm:
https://em3ev.com/shop/grin-tech-torque-arm/
Is it OK to run the build with only one torque arm ? If not, is it OK to do so on 52V 24A (that's what I originally planed) ? Will there be any negative long term effects on the frame ?
I don't know if it has any major impact but here in cologne it's about 0°C (32°F) at the moment.
Thanks
Felix