Just an idea here but since we've now added the ability to input a custom motor on the ebike simulator page ( see https://endless-sphere.com/forums/viewtopic.php?p=1324922#p1324922 ), you could in principle add a column to this spreadsheet that uses the string and math functions to produce a direct URL for viewing this as a custom motor in the online simulator. The only thing missing in your columns right now is the one for the inductance, but everything else is there.
For instance, if we look at the Joby JM1S motor, we have
11 pole pairs
94 rpm/V
.015 ohms
0.107 Nm hyst trq
0.00007 Nm/rpm eddy trq, which is .0000073 Nm/Rad/sec
If I assume that the winding inductance is .05 mH, then this can be expressed in the custom URL string as motor=cust_94_0.015_0.05_11_0.107_0.000007_0
The order is just KV_Ohms_mH_PolePairs_Hyst_Eddie_TransmissionLoss Append it to the URL like this:
http://www.ebikes.ca/tools/simulator.html?motor=cust_94_0.015_0.05_11_0.107_0.000007_0
Of course the default shows it directly coupled to a 26" wheel diameter, while a motor like this would be geared down, so it might make sense to have the string default an initial effective wheel size based on the KV. Here's a more realistic set of parameters for this motor on an ebike:
http://www.ebikes.ca/tools/simulator.html?bopen=false&motor=cust_94_0.015_0.05_11_0.107_0.000007_0&wheel=2i&batt=B5216_GA&cont=C35