OK thanks this is helpful. I misspoke calling them "phase" wires, I am probing at the 6 pin connector that connects the hall sensor with the controller.
EDIT***You got me thinking about my test procedure. I did have the bike together, testing wires at the correct spot with motor and controller...
Sur Ron lite bee
After some "urban trials" riding, I got a stuttering motor with low power. I thought I had partially shredded the primary belt and limped it home. Turns out the belt is in good shape. I tested other cut-off sensors and throttle on the bike and they are good. Testing the hall...
It does not to my knowledge have an auto cruise. I checked, what I believe to be, the manual for the controller and it does not mention anything about that either. The bike doesn't just increase power to match speed, but it accelerates to the point I can barely pedal fast enough to keep up with...
I have E2 kranked kit I bought used. There is a surging which spins the motor up to higher rpms while the motor is under load. For example, I am riding up a mild hill with throttle wide open. If the hill gets steeper, or if I drag the brakes a bit and the motor will spin up faster for a short...