larsb

If you have a potentiometer throttle then that could be the issue. Have you tried it with a hall sensor throttle?

Connected PAS, but power is still the same between all assist levels when I use throttle. I don’t know if this is normal, might be...

So, i did the first 100km on the bike and it’s good and bad. The motor core i had turned out to be a high speed winding so at 12s...

Actually my plan was originally to use it as intended, with a 10s battery, but the bms i had could not be configured as 10s - so i built...

I had the KU63 already and it's dirt cheap and simple. I got tired of Votols when they started screwing up the program, guess that might...

Ok, we have rotation! Love it when things come together as they should, even with a motor core that came from a different wheel, a...

So.. patience is hard so i tried a fix.. I got an answer from avandalen and it seems the calculation of the r1 value is correct, but the...

I have gone full circle from 1000w to 20kW and back to 250w, i’m just building a tootling around bike with a 10 year old ku63 controller...

Sorry for the misunderstanding, of course I meant only using their DD hub on a separate throttle operated programmable controller :) It...

You can use it in a couple of different ways, or just leave it disconnected. You could wire it to your brake switch connector on the...

How is the switch meant to be connected? I guess that if you use a contactor it could break the coil voltage but that shuts down the...