Recent content by Marv1337n

Does this firmware show higher wattage numbers than the stock one with my LCD3? It tops out at 1999W although I'm using a lot more.

Absolutely, they use brand cells and not the generic Chinese 18650. These cells can provide a higher C rate and hold up to their specs pretty well. So the entire battery pack will be much more capable.

EM3EV batteries are a lot better than your typical Ali batteries but they're also more expensive. When you're tight on a bugdget, I'd suggest you go for the 2.6Ah cells listed on the Ali item because they will most likely perform way better than the 3.4Ah ones. Chinese cells have a pretty low C...

That really sucks, sorry! Could you link the used lock? Just wanna know what I'll avoid. I'm using a ABUS Bordo X Granit Plus 6500 in the rear and a noname folding lock in the front currently. That someone steals my bike is my biggest fear because it's the only way I'm getting to work so I'm...

This vendor from Germany is using a DM 18 rim, although with 12g spokes. Any experience with that? https://shop.linergy.de/de/mxus-3k-turbo-3000w-hinterradmotor-in-26-felge.html Getting it laced into a good rim for a reasonable price is pretty hard, both of the vendors you've linked are outside...

Yes I was talking about motors in rims. I've found two vendors for 299 but that's just the motor. I was thinking there was a vendor who's selling a 3K in a rim for 299.

Where have you found it for 299? All Vendors I can find offer it starting from 399.

You need to spend 150$ and shipping is free. I've bought the 6S 20Ah Turningy from the International Warehouse to Germany. Shipping was free but had to pay 45€ taxes afterwards. BUT they're completely sold out at the moment so you have to wait.

I've just got an answer from them, either they didn't understand me or they don't know it lol.

I've wrote them an eMail, I'll let you guys know when I've got an answer.

Thanks to both of you, really appreciated. :thumb: Do you know what the normal ratio is on a stock controller? Or is it different on each one? I really want to know how much phase current my stock 60V 45A KT controller has.

Figured I ask here because I guess the developers of this firmware knows this best. Does the standard KT controllers come with a higher Phase Amps than Battery Amps? e.g. 45A from the Battery but 70A goes to the motor?

I'd just test the controller before returning it, maybe you've got lucky.

Your battery is the limiting factor, not your controller. With that little 11.6Ah battery you can't draw 35A without a heavy voltage sag. That's the reason why you're getting slow speed. Get a better battery with either better cells or better capacity, both would be the best.

I'm not talking about the lifetime, I'm talking about how long one charge lasts.