Recent content by ronniec95

For anyone experiencing the same symptoms, I fixed this by flashing the firmware to the default.

Hi E-HP With speed sensor and chain for reference. Same behaviour. Speed limits are set at 40kmh.

I started it up and ran the throttle. Initial burst then just slows to a constant, very low speed. Video link to problem After 20s or so it will error with missing speed sensor but prior to that I would expect this to work somewhat. This is on Assist 9 just in case of some current limiting issues

I have a newly purchased BBS02B (May 2023); regular config tool works; but when I connect with STC, the MCU check just hangs. It says It just hangs Any ideas?

As the title says. I have a newly purchased BBS02 and upon first tests the throttle rotates the chainring once; you let go and press again and it rotates again. Same with PAS - cycle half a rotation, get a boost, pause and do another rotation, get another boost. No error codes on the DPC18...

Hi I have a triangle battery from EM3EV purchased many years ago which has 3 pin discharge wires: Neg(black), Pos(red) and white(?) which connected to the controller and then from the controller are 3 phase wires to a geared hub motor. I've replaced the whole kit with a BBS02 but given the...

I wanted to make a cable tidy for the buttons and controls that I got with the e3mv ebike kit. It also gave me a chance to clean up the handlebar area. Probably want to make a full dashboard eventually encompassing the cycle analyst too and frankly, just make it look cool. Anyway it's my first...

I solved it. So just in case anyone else sees this behaviour. The problem was the fast threshold voltage setting. It was set to a high 10v/sec level which meant that when I would pedal on a restart, the software throught I was already at speed and would ramp up the voltage as quickly as...

No I don't as I have hydraulic brakes. I did think that was one possible solution, but I feel its a 'feature' in the software too. And also as this seems to happen when crusing and I stop/start pedaling without letter the motor stop or braking suggests even more that it's a feature of the system.

I've got a CAv3 with the 12-pole PAS (all from em3ev) with a Mac10T I've set up the torq-pas mode and it great fun to ride long distances without thinking about throttle; just feels like I'm superman However I noticed one issue: Normal case: 1. While riding, if I stop pedaling the power ramps...

Hi sambaker I jusr posted a long term review of what I use to do a similar journey around London http://endless-sphere.com/forums/viewtopic.php?f=4&t=69404 I commute from west london into central about 12 miles each way but I've done 60 miles on a single charge without issues (London to...

Hi guys Some pics attached The bag at the back just contains work clothes and is not ebike related. Battery, controller, wiring all fitted in the frame bag. Front chain ring is 40T which allows me 90-100rpm at 45kmh. I ride a regular bike too so I'm happy with high cadence riding. fesanand...

Just to add. em3ev is where I got the parts; with Hyena supplying the original kit/instructions. I've been very happy with Paul (em3ev) service.

Hi I've not been on this site for a while but thought it might be interesting to give a long term review for those who are looking for a idea of what it is to own one. I know the top posts here are for people building insanely cool, high spec bikes, but for me who's not a mechanic/machining...

LockH - lol @ headwinds :cry: Yeah, they kill speed fast. Umm, maybe I'll get a velomobile next time ;) One more thing, Heyna sold me a 2KW kit, and the kick from that is seriously awesome. Though you might never need more than 500W riding a round, that feeling of torque with 2Kw in reserve is...