Search results

Date Relevance Most replies

  1. A

    Vector bike and frame owners.

    I mean that without a "proper derailleur" ie one that has a clutch mechanism.. the chain just slaps about I tried all the single speed tensioners under the sun on my previous qulbix q140 builds and customers said clearly they don't want the tensioner I just want a chain so thats what I mean by...
  2. A

    Vector bike and frame owners.

    Recently switched from EEB to Vector as I am building high end bikes I needed a frame to match the EEB was causing them to be confused for Chinese import bikes What a difference in quality anyone on the fence about buying one don't be, I have used Qulbix too but the cost and the need for a...
  3. A

    Adaptto Setup

    No need to turn back on to charge so solved that problem fine, ill give it a ride now then mess with pwr timing. As for ovs I thought it only kicks in when motor is at max voltage limited speed ill use it now and again for speed runs but didn't think it would make any difference at low speed...
  4. A

    Adaptto Setup

    The traction control Smooth setting was causing the motor to knock, the motor would kick in and out Put it to the highest number instant smooth power Things are looking good hopefully others find this post as I read so many long threads and you two guys just solved all my issues in 2...
  5. A

    Adaptto Setup

    Can I still charge once ‘charge enable’ is turned off I just did an auto detect i assumed it would already have been done but it hadn’t Motor is smooth as now and uses 40w to spin wheel no load 20mph before it was 5/600w to maintain no load 20mph so that’s sorted that I hope OVS I want to...
  6. A

    Adaptto Setup

    Hello Guys I have an Adaptto Max-E and need some advice, it randomly will enter 'Charge' Mode It usually happens when stopped and I need to press left and down to get back into normal mode. Any idea what is causing this? Secondly what are everyones settings, I am struggling to get it...
  7. A

    Li ion BMS 16/20 S 50 A with Bluetooth controll via app

    I have this bms in a 14s5p shark pack GA cells Left at 3.77 volts and after I think 8 months its been the cells are all still at that level so something is wrong with your pack maybe cheap cells or heat damaged?
  8. A

    Kt Controllers Compatibility

    I have a kit that uses an older Kunteng controller When i adjust the parameters using LCD3 it seems to have no effect on the current when measured separately with a watt meter. ' I changed the C11 parameter to LCD1/LCD2 mode but it hasn't helped like it should have. Anyone have any ideas...
Back
Top