Search results

Date Relevance Most replies

  1. M

    charger and bms requirement

    http://scriptasylum.com/rc_speed/lipo.html In this link, in prismatic connection. what is the bms requirement and charger requirement for 6s and 10 p cells?
  2. M

    BMS ??

    guys, I'm using 6s 18650 batteries containing a set of 10packs to get 36000mAh. What should be the charger requirement for charging the above said battery pack.
  3. M

    BMS ??

    I have ordered one for the same to test the sample. I saw it as the maximum possible. I have gone for 5800mAh since it might reduce the size of my power source. If it isnt possible then i should switch to 3600mah. SO it might take upto 6 cell in series and 20 sets of the same in parallel. Can u...
  4. M

    BMS ??

    i'm going to use 18650 5800mAh batteries for drones. My requirement is 22 v for esc and 60 Ah for the motor. So, im going to connect 6 cells in series to get 22.2 volts and 10 sets of (6 series batteries ) to get the required amount. I require a bms for the same . Cost doesnt matter much . but...
  5. M

    3-192S Arduino BMS (using BQ76PL536A)

    Can u share me your schematic.? i need a bms system for 60 Ah.
  6. M

    [DEAD PROJECT] OSBMS - A scalable, low cost, and full featured BMS

    guys i need to power an Esc which requires 55A and 22v. i'm using power source from 18650 batteries. I'm using 6 batteries in series + 10 sets of similar batteries to get the required power ratings. voltage:6*3.7=22.2v current:5.8*10=58 a(10 sets of 6S) how many slave boards do i require?
  7. M

    BMS ??

    Guys i need to power an Esc which requires 55A and 22v. i'm using power source from 18650 batteries. I'm using 6 batteries in series + 10 sets of similar batteries to get the required power ratings. voltage:6*3.7=22.2v current:5.8*10=58 a(10 sets of 6S) What kind of BMS should I use? any...
Back
Top