Well here goes after finding ES and reading learning heaps finally bought a dh frame and cromotor + 18 fet infinion, those are the main ingredients.
But Hay the motor is 2 wide for the frame [ 135mm frame, 150mm cromotor] so after speaking to a frame welder was told id weaken it if i got it welded so, the challenge was to find a way to achieve widening the swing-arm for the motor, but allow for some adjustment for centering, also longer wheel base would be good and some extra shock to swing-arm brackets for height adjustments later for pedal clearance because off 17" mx rims, sooo after much thought, i cut and got it welded in a place that wasnt as crucial structurally.
But Hay the motor is 2 wide for the frame [ 135mm frame, 150mm cromotor] so after speaking to a frame welder was told id weaken it if i got it welded so, the challenge was to find a way to achieve widening the swing-arm for the motor, but allow for some adjustment for centering, also longer wheel base would be good and some extra shock to swing-arm brackets for height adjustments later for pedal clearance because off 17" mx rims, sooo after much thought, i cut and got it welded in a place that wasnt as crucial structurally.