Hi,
I have a new battery and want to use my old charger from BMS battery. My new battery is 14s, to requires a voltage of 58.8V.
I previously had a 12s setup. I found out that the voltage on these charger can be adjusted via a trim pot, however my charger maxes out at 56V.
Can I modify the charger, trim pot or near by resistor to increase the voltage to 58.8V?
Thanks in advance
The charger is similar to this photo inside:
I have a new battery and want to use my old charger from BMS battery. My new battery is 14s, to requires a voltage of 58.8V.
I previously had a 12s setup. I found out that the voltage on these charger can be adjusted via a trim pot, however my charger maxes out at 56V.
Can I modify the charger, trim pot or near by resistor to increase the voltage to 58.8V?
Thanks in advance
The charger is similar to this photo inside:
![ch2_zpsd3ddd23f.jpg](/sphere/proxy.php?image=http%3A%2F%2Fi766.photobucket.com%2Falbums%2Fxx304%2FDanGT86%2Fch2_zpsd3ddd23f.jpg&hash=f54b912c793ba2684e8f76a1ba27920b)