jonescg
100 MW
HI everyone,
I've got stacks of leftover 18650 cells for sale. I'd buy 1000+ of them, build a battery and have like, 70 left over. Not enough to start a new project, but too many for a simple project.
Red cells are Panasonic NCR18650BD cells (60 of them) - 3200 mAh and 3C continuous. $200
Blue cells are INR18650MH1 cells (77 of them) 3200 mAh and 3C continuous. $250
I also have a dozen of these 8 Ah Li-ion pouch cells from a previous project which never got used. You can feasibly build a cheap 10s pack from them if you found a reasonable termination system to work with. $100
Almost forgot - I have some BMS PCBs with connectors (3 at 10 A continuous, three at 25 A continuous) - these are from Mr Henry in China. All work reasonably well, and certainly better than nothing. $50 for the lot.
Finally, I also have a 48 V, 25 Ah (14s,7p) e-bike battery pack made from Panasonic NCR18650GA cells (3500 mAh) complete with a 40 amp continuous BMS. This battery is completely potted in epoxy resin, but the BMS can be removed if you need to. It hauls a 1000 W ebike up Crystal Brook Road no sweat. $300.
Prefer a local buys them to save on postage hassles, but will make the effort if you do too.
PM me, or email me christophergrahamjones(at)gmail(dot)com
I've got stacks of leftover 18650 cells for sale. I'd buy 1000+ of them, build a battery and have like, 70 left over. Not enough to start a new project, but too many for a simple project.
Red cells are Panasonic NCR18650BD cells (60 of them) - 3200 mAh and 3C continuous. $200
Blue cells are INR18650MH1 cells (77 of them) 3200 mAh and 3C continuous. $250
I also have a dozen of these 8 Ah Li-ion pouch cells from a previous project which never got used. You can feasibly build a cheap 10s pack from them if you found a reasonable termination system to work with. $100
Almost forgot - I have some BMS PCBs with connectors (3 at 10 A continuous, three at 25 A continuous) - these are from Mr Henry in China. All work reasonably well, and certainly better than nothing. $50 for the lot.
Finally, I also have a 48 V, 25 Ah (14s,7p) e-bike battery pack made from Panasonic NCR18650GA cells (3500 mAh) complete with a 40 amp continuous BMS. This battery is completely potted in epoxy resin, but the BMS can be removed if you need to. It hauls a 1000 W ebike up Crystal Brook Road no sweat. $300.
Prefer a local buys them to save on postage hassles, but will make the effort if you do too.
PM me, or email me christophergrahamjones(at)gmail(dot)com
Attachments
Last edited: