Samd
10 MW
I also managed to luck onto the maker of this motor a few weeks back as a number of us have been chasing a 35mm motor for a few years as a replacement to the 6.2kg Mxus 29mm V2. I even went to QSmotor to see if they would tool up for this size in their thread but the costs were ridiculous.
Its a struggle to upgrade phase wires much past 2mm on the current axle. There has been some discussion about upping the magnets to 40mm but supplier is a bit lost I think.
Keen to get those samples. There's also a smaller radius DD motor with a wide stator that may make a really good middrive donor.
Its a struggle to upgrade phase wires much past 2mm on the current axle. There has been some discussion about upping the magnets to 40mm but supplier is a bit lost I think.
Keen to get those samples. There's also a smaller radius DD motor with a wide stator that may make a really good middrive donor.