jazzcat007
1 µW
- Joined
- Jun 20, 2013
- Messages
- 4
Long time lurker but first post. I decided to start my own build off of a Felt Deep Six. I wanted to make this build as invisible as possible. I tried hiding my batteries in true leather horse saddle bags and my controller in a leather tool seat bag. On my tests everything has worked well except every now and then, most times after a jolt (such as hitting a bump in the road), I lose all power. If I pull over and wait a while before hooking the battery up it will work fine again for another short run. These are my first rides so I would effectively call them ‘alphas’. I thought now would be the time to reach out before I damage any components. This is a GNG 48V 450 Mid Drive which I was able to place inside the triangle. I have a 10AH 48V Lifepo4 Vpower battery with BMS. The controller doesn’t seem to be getting hot. Any suggestions would be appreciated.