4sken
100 mW
I have a KT-3 LCD (https://www.google.ca/search?q=kt3+lcd&espv=2&biw=1920&bih=955&source=lnms&tbm=isch&sa=X&ved=0ahUKEwivneW7tPbKAhUHmh4KHc_ZBDoQ_AUIBygC#imgrc=XPK_XrCZLNF-5M%3A) That worked fine, until at one point the hall sensors in my motor went. I fixed it after a while and moved everything over to my winter bike, got a new controller and continued riding-However, it never fully displayed watts drawn. The controller I have is one of the no-name no-brand chinese style (https://www.google.ca/search?q=kt3+lcd&espv=2&biw=1920&bih=955&source=lnms&tbm=isch&sa=X&ved=0ahUKEwivneW7tPbKAhUHmh4KHc_ZBDoQ_AUIBygC#tbm=isch&q=48v+1000w+ebike+controller&imgrc=MiHP1_-xTndNMM%3A) but is a different one then the stock controller I got with the LCD and motor. Does anyone know if having a different controller might be causing this (And if so, how to fix it) or if something inside has been damaged? The Hall broke after shorting out to phase... Judging by the wire colours going to the LCD at least two hall wires lead up into it, probably to calculate speed, so my guess is it's probably the LCD. Chances are something like this has happened to someone else...