YonderGod
1 W
Can anyone decipher these poorly translated instructions?
I'm running a 12s(44.4v) battery, so the default setting for a 48v battery shows my battery as low all the time. And I'd prefer 42v lvc if possible.
From the manufacturers manual:
From BMSbattery website: (they label it the S-LCD1, but I think it's the same thing)
I'm running a 12s(44.4v) battery, so the default setting for a 48v battery shows my battery as low all the time. And I'd prefer 42v lvc if possible.
From the manufacturers manual:
http://www.szktdz.com/en/news_show.php?article_id=374P5 is power monitoring mode, when P5 setting is 0, the power monitoring is the
"real-time voltage" mode. Namely, it is the method to determine the battery capacity
based on real-time battery voltage. When P5 equals to a specified parameter, the power
monitoring is the "smart power" mode (this parameter is determined by the battery
characteristics, ordinary 24V lithium is generally is 4-11, 36V lithium is between 5_15). P5
setting ranges from 0-40
From BMSbattery website: (they label it the S-LCD1, but I think it's the same thing)
https://bmsbattery.com/ebike-kit/548-s-lcd1-e-bike-lcd-meter-ebike-kit.htmlNote: How to determine the value of the parameter P5 ? The formula is LVC+P5/3.77.
For 24V battery, LVC=20V, P5/3.77=1.
For 36V battery, LVC=30V, P5/3.77=1.5.
For 48V battery, LVC=40V, P5/3.77=2.
You can adjust P5 parameter by your own battery discharge curve.