cbr shadow
1 kW
I'm buying a battery through Cellman, who also offers controllers. Shipping is expensive, which adds to his (very low) initial cost of the controller. I also got a quote from Lyen, which is more expensive but shipping is much less and he will give detailed instructions on the wiring since he's familiar with the HS3540 that I'm using. Which to go with?
1) Infineon 65A - IRFB4110 - ($150)
2) Lyen 18 FET 4110 Mark II Overclocker Ready LYEN Edition Controller ($199)
With the added shipping for the Infineon they're about the same price. I'm sure the wiring isn't too complicated where I couldn't figure it out, but it's nice that Lyen will give detailed instructions to connect with an HS3540 motor and my exact setup.
Thoughts? One thing I didn't ask was what the Lyen controller was rated at as far as Amps.. I plan on running it at 45A, but is that lots of room for bringing it up in the future?
1) Infineon 65A - IRFB4110 - ($150)
2) Lyen 18 FET 4110 Mark II Overclocker Ready LYEN Edition Controller ($199)
With the added shipping for the Infineon they're about the same price. I'm sure the wiring isn't too complicated where I couldn't figure it out, but it's nice that Lyen will give detailed instructions to connect with an HS3540 motor and my exact setup.
Thoughts? One thing I didn't ask was what the Lyen controller was rated at as far as Amps.. I plan on running it at 45A, but is that lots of room for bringing it up in the future?