jrajakaruna
1 µW
Hello ebikers,
Here's some links for my ebike project. I've built a 1000W ebike from an MOngoose cx 450 frame.
http://www.youtube.com/watch?v=xvZBVRafwyg
http://www.youtube.com/watch?v=RzGt9r1cBGY
http://www.youtube.com/watch?v=T6YMV22frT4
New Swingarm test fitting with motor mounted.
Left Side
Right Side
Here is the bike stance minus batteries and rider. The shock is from a small ZAP BUZZ E-ATV.
Test pieces for an additional skid plate.
Test fit.
Rear wheel chain tensioners are a must. Because 2 chains are being used the torque applied to each is difference and will cause the axle to move unless a chain tensionaer is used. Also, for the drive chain I used a left threaded freewheel to allow me to freewheel or pedal while the motor is on/off.
Here's some links for my ebike project. I've built a 1000W ebike from an MOngoose cx 450 frame.
http://www.youtube.com/watch?v=xvZBVRafwyg
http://www.youtube.com/watch?v=RzGt9r1cBGY
http://www.youtube.com/watch?v=T6YMV22frT4
New Swingarm test fitting with motor mounted.
Left Side
Right Side
Here is the bike stance minus batteries and rider. The shock is from a small ZAP BUZZ E-ATV.
Test pieces for an additional skid plate.
Test fit.
Rear wheel chain tensioners are a must. Because 2 chains are being used the torque applied to each is difference and will cause the axle to move unless a chain tensionaer is used. Also, for the drive chain I used a left threaded freewheel to allow me to freewheel or pedal while the motor is on/off.
