MoonBassMan
10 W
I've been riding street bikes for a few years. Most recent build was a (gas) stunt bike. Looking to go green. I want to make an electric stunt bike to replace my R6. I need torque, durability, and control.
BUILD ITEM LIST
Frame: Raptor style
200mm Front Fork: DNM USD-8
Rear Shock: Burner RPC3
Lever/Hand Guards: https://www.amazon.com/dp/B004BOXKN0
Disk Brakes: HOPE Tech 3 V4, 203mm rotor
Moto Rims/Tires: 19in Rim (8g rear, 12g front spokes), Avon AM26 Motorcycle Tire (3.25-19 front, 90/90-19 rear)
Kickstand: EM3EV kickstand or Vector kickstand
Mud Guards 1: Mudhugger front & rear https://www.themudhugger.us.com/shop/
Mud Guards 2: Moto front https://www.amazon.com/gp/product/B0031216I4/, CRF50 rear https://www.aliexpress.com/item/New-Promotion-7pcs-Plastic-Fairing-Blackand-White-color-for-Motorcycle-Honda-CRF-XR-50-Car-Motorcycle/32818773020.html use 3 or 4 of 7 total pieces
Mirrors: Riderscan https://www.amazon.com/dp/B00MGXQL3E/
Headlights: Opar Daymaker 7in LED with Halo https://www.amazon.com/dp/B01MG0ZX3Y
Brake lights & Blinkers: (Front) https://www.amazon.com/dp/B01L8YZ0GU (Rear) https://www.amazon.com/dp/B01L8YZ0II
Handlebar switches: Baja Bar Switches, slim profile
5v 2a USB portS: https://www.amazon.com/dp/B01BV1MTAA/
GPS Tracker?:
Throttle: Domino
Fuse: Automotive/Marine fuse assembly for accessories
DC-DC Converter: 100v to 12v, 25a (I need to find a new model, current inverter is too large)
LOUD Horn: Wolo (419) Air Horn https://www.amazon.com/dp/B000F5DQWY
DD hub Motor: QS v3 273 40H http://www.cnqsmotor.com/en/article_read/QS%20Motor%204000W%20273%2040H%20V3%20E-bike%20Spoke%20Hub%20Motor/260.html
Torque Arms/Blocks: Buy or make
Controller: Sabvoton SVMC72200 or ASI 8000
Battery: (still being planned) 24s Lipo, 30Ah or more, charged to 4.1v per cell
BMS: (with battery build)
Charger: (with battery build)
Display: http://cnqsmotor.com/en/article_read_807.html on the bars & Cycle Analyst v3 on the frame.
Hub heat sinks: I will get two sets and modify them to fit the 273 after a few months of riding with Ferrofluid
Ferrofluid: Statorade http://www.ebikes.ca/statorade.html
OH and to add. I like the idea of later building a small coffin shaped, vertically telescoping trailer to haul behind this creation. I could store gear in/on it, extra battery packs in the trailer frame, solar panel charging. Raise it up and sleep inside. Just a thought now, but planning this bike to accommodate the likely possibility of the trailer build.
This project is in loving memory of Uncle J. Miss you
BUILD ITEM LIST
Frame: Raptor style
200mm Front Fork: DNM USD-8
Rear Shock: Burner RPC3
Lever/Hand Guards: https://www.amazon.com/dp/B004BOXKN0
Disk Brakes: HOPE Tech 3 V4, 203mm rotor
Moto Rims/Tires: 19in Rim (8g rear, 12g front spokes), Avon AM26 Motorcycle Tire (3.25-19 front, 90/90-19 rear)
Kickstand: EM3EV kickstand or Vector kickstand
Mud Guards 1: Mudhugger front & rear https://www.themudhugger.us.com/shop/
Mud Guards 2: Moto front https://www.amazon.com/gp/product/B0031216I4/, CRF50 rear https://www.aliexpress.com/item/New-Promotion-7pcs-Plastic-Fairing-Blackand-White-color-for-Motorcycle-Honda-CRF-XR-50-Car-Motorcycle/32818773020.html use 3 or 4 of 7 total pieces
Mirrors: Riderscan https://www.amazon.com/dp/B00MGXQL3E/
Headlights: Opar Daymaker 7in LED with Halo https://www.amazon.com/dp/B01MG0ZX3Y
Brake lights & Blinkers: (Front) https://www.amazon.com/dp/B01L8YZ0GU (Rear) https://www.amazon.com/dp/B01L8YZ0II
Handlebar switches: Baja Bar Switches, slim profile
5v 2a USB portS: https://www.amazon.com/dp/B01BV1MTAA/
GPS Tracker?:
Throttle: Domino
Fuse: Automotive/Marine fuse assembly for accessories
DC-DC Converter: 100v to 12v, 25a (I need to find a new model, current inverter is too large)
LOUD Horn: Wolo (419) Air Horn https://www.amazon.com/dp/B000F5DQWY
DD hub Motor: QS v3 273 40H http://www.cnqsmotor.com/en/article_read/QS%20Motor%204000W%20273%2040H%20V3%20E-bike%20Spoke%20Hub%20Motor/260.html
Torque Arms/Blocks: Buy or make
Controller: Sabvoton SVMC72200 or ASI 8000
Battery: (still being planned) 24s Lipo, 30Ah or more, charged to 4.1v per cell
BMS: (with battery build)
Charger: (with battery build)
Display: http://cnqsmotor.com/en/article_read_807.html on the bars & Cycle Analyst v3 on the frame.
Hub heat sinks: I will get two sets and modify them to fit the 273 after a few months of riding with Ferrofluid
Ferrofluid: Statorade http://www.ebikes.ca/statorade.html
OH and to add. I like the idea of later building a small coffin shaped, vertically telescoping trailer to haul behind this creation. I could store gear in/on it, extra battery packs in the trailer frame, solar panel charging. Raise it up and sleep inside. Just a thought now, but planning this bike to accommodate the likely possibility of the trailer build.
This project is in loving memory of Uncle J. Miss you