bendik.vignes@gmail.com
10 mW
- Joined
- Aug 16, 2016
- Messages
- 24
Hi!
I just finished my three-wheel cargo bike electric conversion. I use two Golden motor BLT-800 motors, and BAC 28 controllers (also called "cruise controller"). But I have problems with programming. I have tried both the software downloaded from goldenmotor.com, and the software from this page: https://goldenmotor.com/SMF/index.php?topic=2072.0
I can change max speed, max current, rotation direction, reverse speed
But regen brake is either off (0%) or hard on (no noticable change between 1% and 100%), and no current goes to the batteries (the energy is absorbed by the controller itself)
And and I cannot see any noticable difference between the different PAS settings ("low" also feels very strong)
Does anyone of you see any solution?
I just finished my three-wheel cargo bike electric conversion. I use two Golden motor BLT-800 motors, and BAC 28 controllers (also called "cruise controller"). But I have problems with programming. I have tried both the software downloaded from goldenmotor.com, and the software from this page: https://goldenmotor.com/SMF/index.php?topic=2072.0
I can change max speed, max current, rotation direction, reverse speed
But regen brake is either off (0%) or hard on (no noticable change between 1% and 100%), and no current goes to the batteries (the energy is absorbed by the controller itself)
And and I cannot see any noticable difference between the different PAS settings ("low" also feels very strong)
Does anyone of you see any solution?