smeagol222
100 W
Wondering if anyone has programmed one of these controllers before?
http://kellycontroller.com/KEBhelp.php
http://kellycontroller.com/keb72601x24v-72v280a6kw-bike-brushless-controller-regen-p-279.html
I have a 20s10p 72v pack with LG MJ1 cells 10a cont.
I couldnt find anywhere that lists the peak amps (10 sec) to match up with kelly programming
This pack would be 10p x 10a = 100a cont. Kelly says to limit battery current to 60%, motor current to 80%
60% of 100a = 60a cont. Feels like too much of a limit to me, how will I hit my peak amps (approx 90a) for torque and takeoff etc
The load is QS motor 10" v3 (4000w/7000w peak) 90a max.
I will be using CA with shunt to measure load amps- should I just start with 60% and go from there? CA will be measuring battery amps under load?
http://kellycontroller.com/KEBhelp.php
http://kellycontroller.com/keb72601x24v-72v280a6kw-bike-brushless-controller-regen-p-279.html
I have a 20s10p 72v pack with LG MJ1 cells 10a cont.
I couldnt find anywhere that lists the peak amps (10 sec) to match up with kelly programming
This pack would be 10p x 10a = 100a cont. Kelly says to limit battery current to 60%, motor current to 80%
60% of 100a = 60a cont. Feels like too much of a limit to me, how will I hit my peak amps (approx 90a) for torque and takeoff etc
The load is QS motor 10" v3 (4000w/7000w peak) 90a max.
I will be using CA with shunt to measure load amps- should I just start with 60% and go from there? CA will be measuring battery amps under load?
