Hi i think i do somting wrong. Maybe someone can tell me what i do wrong.
I connect the controller to port 3, throttle to port 4, temp sensor to port 2 and speedsensor to port 1.
The software in Throttle Mode. When i twist the throttle the wheel don't spin.
I see in the port the throttle work. Valu changes from 185 to 490 when twist.
The wheel is ok when i have to set the low and high value for throttle in the speedict the wheel spins nice.
Speedict-eBike Log 07/15/12 18:53
ebike setting
Firmware Version = 2.4.0
Odometer = 21484
TotalMAH = 1583495
UnitDistance = 0
UnitTemperature = 0
TyreValue = 2288
GovEnable = true
GovSpeed = true
GovVoltage = true
GovCurrent = true
GovTemperature = true
GovWatt = true
GovSpeedValue = 250
GovVoltageValue = 2240
GovCurrentValue = 1500
GovTemperatureValue = 700
GovWattValue = 700
GovAlert = 1
ModeType = 3
PASPointCount = 5
PASPowerLevel = 100
PASMatchValue = 60
ThrottleRangeOver = 0
ThrottleRangeLow = 135
ThrottleRangeHigh = 225
ThrottleMode = 2
ThrottleSpeedValue = 400
ThrottleSpeedGain = 100
ThrottleCurentValue = 1500
ThrottleCurrentGain = 50
CruiseFlat = -76
6kmModeFlat = 0
SoftStartFlat = 1
SoftStartGain = 50
ebike setting end ====
Port1 Port2 Port3 Port4 Current
0,0 21,1 0 185 0,00
0,0 21,1 0 185 0,00
0,0 21,1 0 185 0,00
0,0 21,1 0 185 0,00
0,0 21,1 0 185 0,00
0,0 21,0 0 234 0,00
0,0 21,0 0 490 0,00
0,0 21,0 0 490 0,00
0,0 21,0 0 490 0,00
0,0 21,0 0 184 0,00
0,0 21,0 0 417 0,00
0,0 21,0 0 490 0,00
0,0 21,0 0 490 0,00
0,0 21,0 0 184 0,00
0,0 21,0 0 185 0,00