Another day in the garage made me ducktape the pieces together and finally ride the bike (first time with proper brake).
I think some of the ducktapers around here would be proud of me
Besides ducktaping I've been working on the following:
-Installed new headset to accomidate the new front shock fork
-Installed new disk brake 180mm, mount and lever
Result after ducktaping:
The maximum speed I could reach was 42km/h (26MPH) according the CA. I currently only have the front disk brake working, but the disk became very hot after some fast stops. At higher speeds I could hear some noises that I'm not that happy with. One noise came from the front wheel. I think I will need to get the wheel trued and align the diskbrake better. At the rear wheel you can hear a noise coming from the spokes. This wheel has been trued already, but I found out that there is a slight bump in the rim I guess I'll have to find a new rim for the 9C wheel.
Here you can see a vid of the wobbeling wheel (before it was trued):
[youtube]OW8iDzyCjIs[/youtube]
I'll hope to work on the epoxy tank next week and desolder the "cruise control" feature on the Infineon controller.