fjodorlogin
1 mW
- Joined
- Aug 13, 2021
- Messages
- 16
My plan is to combine these tutorials:
1. Performance boost modification
https://m.youtube.com/watch?v=YpuEL2_Wvz8&t=423s
2. Welding pen modification
https://www.youtube.com/watch?v=pSOmJVss76s&t=264s
Parts I would need:
- Shrink tube 6mm
- 25 square mm wiring
- Welding tips
In other words, not the most expensive upgrade if I succeed.
I'm building a 13s6p battery for my 500w escooter using salvaged 18650 cells from two original broken batteries (13s10p).
My main problem is that currently the welder lacks a welding pen attachment and won't fit anything wider than two rows.
Question: Has anyone attempted something similar, or do you have advice in general?
I spent yesterday evening scouting the internet but nobody seems to have done this exact mod to a 220v model.
Thankful for replies!
1. Performance boost modification
https://m.youtube.com/watch?v=YpuEL2_Wvz8&t=423s
2. Welding pen modification
https://www.youtube.com/watch?v=pSOmJVss76s&t=264s
Parts I would need:
- Shrink tube 6mm
- 25 square mm wiring
- Welding tips
In other words, not the most expensive upgrade if I succeed.
I'm building a 13s6p battery for my 500w escooter using salvaged 18650 cells from two original broken batteries (13s10p).
My main problem is that currently the welder lacks a welding pen attachment and won't fit anything wider than two rows.
Question: Has anyone attempted something similar, or do you have advice in general?
I spent yesterday evening scouting the internet but nobody seems to have done this exact mod to a 220v model.
Thankful for replies!