famichiki said:
Does anyone know exactly what version Marcoq's fork is based on?.....
For what I know Marcoq has used the stable version of v.0.19.
But because he has released v0.19A, v0.19B, v0.19C, it could be that he changed some things.
I admire your perseverance to find the solution for your problems that you have find in all vlcd versions. (marcoq, demion, ackmaniac). But if I read your complains in the
other topic:
famichiki said:
...motor overrun and strange kick of power sometimes after stopping pedalling. Right now I need to wait a few seconds after stopping pedalling to change gear smoothly. However momentary braking cuts power instantly and smoothly. The problem is that after releasing the brake the overrun can restart, and also can still get that strange kick......
It looks like the complains I read
here by toñocid. This was a hardware problem.
...
.When you press the pedal and stop the motor continue working a time
.you feel more power assist than normal
FYI (
Source):
It is possible to measure torque with vlcd5/6, XH18 too with the
latest release of mbrusa
For comparision with
wiki you need to do a calculation of the measured values. (x10/4)
EDIT:
mbrusa made an
update that doesn't need the calculation anymore.
To consider:
All vlcd versions are based on v.0.19. Marcoq has annouced he is working on a v0.20 configurator too, but it will be a matter of time to be released.
Demion has made in the past a vlcd release of v.018 and v0.19
without any modifications on the original OSF, but with replacement of only two files (config.h and ebike_app.c).
(like mbrusa does too with his additions for marcoq's v0.19C).
I know too little about coding to judge whether this is also possible for v0.20 OSF without deep digging.