k10e3r
1 mW
- Joined
- Jul 30, 2021
- Messages
- 19
Hello every one.
I'm new here and posting to share and have advices.
So here is a 10Kw street bike project I'm working on.
The goal is to have a bike for daly use and about 2h run time for week ends.
26" wheels, 1200mm wheel base, Front 60mm wide, rear 80mm
MOTOR: 12090 Outrunner, 130KV, 18KW max, (watercooling later)
ESC: 3-22S 400 A Watecooled
Pack: 18650 Li-ion 14s x 28p ~50V 78Ah
BMS: Daly 14S 250A Li-Ion
I did some drawing, a mixture of a moto3 and e-bike
A lot of questions still open??? But will ask step by step
Frame should be aluminium or fibre...
Let me know if you have doutes on any point.
I'm new here and posting to share and have advices.
So here is a 10Kw street bike project I'm working on.
The goal is to have a bike for daly use and about 2h run time for week ends.
26" wheels, 1200mm wheel base, Front 60mm wide, rear 80mm
MOTOR: 12090 Outrunner, 130KV, 18KW max, (watercooling later)
ESC: 3-22S 400 A Watecooled
Pack: 18650 Li-ion 14s x 28p ~50V 78Ah
BMS: Daly 14S 250A Li-Ion
I did some drawing, a mixture of a moto3 and e-bike
A lot of questions still open??? But will ask step by step
Frame should be aluminium or fibre...
Let me know if you have doutes on any point.