lanceRomance
1 µW
- Joined
- Aug 17, 2022
- Messages
- 2
As most of you are aware by now of how Lime/Bird scooters work - after paying for time on their unit, it unlocks/enables the ability to power the device and drive until your time or money runs out.
I am wondering how to achieve this for my bike with same functionality on a hardware/technical level? Do I need programmable access to my controller?
From the initial research I have done, it seems as though I may need a set of circuits or module on my own PCB board and have that receive input from a phone/device. I am hoping some of you might be able to point me in the right direction here. Happy to continue my research with your nudge.
I am wondering how to achieve this for my bike with same functionality on a hardware/technical level? Do I need programmable access to my controller?
From the initial research I have done, it seems as though I may need a set of circuits or module on my own PCB board and have that receive input from a phone/device. I am hoping some of you might be able to point me in the right direction here. Happy to continue my research with your nudge.