blinkwillie
1 µW
- Joined
- May 21, 2021
- Messages
- 1
I have an ebike with a 350W geared motor.
A few hours ago the ebike was working 100% fine.Used it to go to work as per normal.Then when i reached home I found out that my new floating rotors had arrived.
So I took the bike apart and installed the new rotors.After I reinstalled the rear wheel(minus the brake caliper),it wouldnt budge at all.In either direction.Not even an inch.I had to use a lot of effort to even turn the wheel.It feels solid and almost locked up.
I have checked all the mechanical bits.There is nothing stopping the wheel from spinning freely.Also i have checked the wires coming out from the axle.There is no signs of damage to the insulation.
What could the issue be?
A few hours ago the ebike was working 100% fine.Used it to go to work as per normal.Then when i reached home I found out that my new floating rotors had arrived.
So I took the bike apart and installed the new rotors.After I reinstalled the rear wheel(minus the brake caliper),it wouldnt budge at all.In either direction.Not even an inch.I had to use a lot of effort to even turn the wheel.It feels solid and almost locked up.
I have checked all the mechanical bits.There is nothing stopping the wheel from spinning freely.Also i have checked the wires coming out from the axle.There is no signs of damage to the insulation.
What could the issue be?