Hummina Shadeeba

I didn’t look into it much but imagine the gear ratio isn’t that big with these and what I’m after. I see lots of mid drive motors but...

What were u going to do with them? I plan to use a belt with them as well. Are they just loose parts? Please post pics

Having the sun gear connected to driving pulley and on floating shaft. The planet gear carrier (blue)locked to the true shaft. I guess...

Is it a problem using a vesc with the photon motor?

Supposedly works for lithium batteries as well

There’s also a guy in the Bay Area California selling these cells new for about a buck each. I forget his name but Zambam got them...

It’ll largely be speed coming off the motor passing by belt to the hub through the brake rotor mount holes. It’s not much torque at...

I was imagining the torque from the motor being transferred to the hub through a pulley connected using disk brake mount holes on the...

Ur teasing but I don’t want to use a gear box. It adds complexity and have to use a bigger chain. …even 1:6 would be good enough with...

I think a bmx frame and 14mm axle won’t break. Maybe a 26” bicycle wheel with 36 spokes can’t survive such torque. I’m somewhat joking...

I haven’t looked much but all the available hubs have low (or fivking high..the terminology I’m confused) gear ratios at not even 3:1...

The tiny sprocket on the motor is probably the largest noise source as well as where greatest inefficiency and vibration is from.

Pitch being distance between pins I dont know about ur battery and what would fit. I imagine ideal would be one case that clamps on ur...

The Marin city and Tiburon library both have Makers Spaces with printers and also laser cutters. There’s also Noisebridge in the...

Wonder why louder. Maybe the rear sprocket pitch doesn’t match the chain Getting all ur battery weight in or under the frame triangle...