-
-
ebikestuff.eu reacted to katana1234's post in the thread TSDZ8 OSF (open source firmware) with
Like.
Thanks for implementig the code. :) The output will probably be a bit different from my version because you are applying the averaging... -
You are right. - When expo is set on the default value (e.g. 20 on 860c or 0 in javaconfigurator) the expo has no effect at all (result...
-
I also added now version V00_01_26 (for 860c). This version uses the logic developped by katana1234 for VLCD5. I made minor changes in...
-
To calculate the best torque ADC step for TSDZ8 when version 0.1.20 (or other version that uses the max torque over one pedal rotation...
-
I put on github a version V00_01_25 for 860C. In this version, assistance is based on the moving average torque over one rotation...
-
ebikestuff.eu replied to the thread TSDZ8 OSF (open source firmware).I can confirm that in v0.1.23, the motor was not providing smooth assistance. I only did a quick ride without playing with the config...
-
Thanks for the feed back on version 23. I made some more changes in version 0.1.24 (uploaded) Still not sure that it fix the issue. I...
-
I think I had still a bug in V00_01_22 (version only for 860C currently). I changed it now and put V00_01_23 on github.
-
I just put a version 0.1.21 on github but only for for 860C. I could change VLCD5 version later on if this one is succesful. The...
-
ebikestuff.eu reacted to katana1234's post in the thread TSDZ8 OSF (open source firmware) with Like.
I've been testing my own latest version on a long trip today. That included roads, gravel, trails... flat, steep... - quite everything...
-
It is not clear if you question refers - only to javaconfigurator - also all changes in OSF firmware. For the first...
-
I just put on github 2 new versions named V00_01_20. One is for VLCD5 and the other for 860C. For 860C version there is only a minor...
-
Thanks for the feedback. There was a check in the firmware (copied from TSDZ2 version) that generates a torque sensor error when the...
-
I put on github a version 0.1.19 for VLCD5 display (and similar displays compatible with original TSDZ8 firmware) that contains the...
-
I uploaded version 0.1.18 in order to fix a small bug in the way parameter ADC range adj is used. There is no change to the instructions...
-
-
Loading…
-
Loading…