Recent content by 67RS427

Can you share what your current setup is? I'd love to try this on my FarDriver and have a nicer external display. Thanks!

Were you able to get any further with this? I'd love to open up my options to other displays for my FarDriver...

Did you get anywhere with investigating this?

Anyone here have an issue with their FarDriver cutting out with no errors and giving a single beep when the throttle is twisted? This has happened to me twice. The controller worked fine with the same throttle, this issue popped up when I switched motors to an FW11 from a MY1020. The only other...

Have you tried to contact him? I had an issue with mine and he sent me another battery for free... Great seller, no issues here. I've bought half a dozen of them.

perhaps that's what the cells are rated for but from my experience, if you run these at more than 35A, the voltage sag will trip the BMS... For the price, you really can't beat it. 33A will still work with your Vevor kit, in fact your controller is the limitation above 30A anyways.

They are good batteries, I got two from him. They can do about 33A each so I run 2x in Parallel for a 65A draw on my SX500 and Vevor 1800w.

you need to jump on the Facebook Razor Groups like Modified Razors for Adults... I send customers your way all the time. Sellers on there are charging a lot more so you could move more volume.

Anyone buy one of these and have good luck running it? I'm getting a measured 54v (on discharge lead) after a full charge to 54.6v. If I measure voltage at the charging port when fully charged I'm only getting as low as 44.7v, or sometimes just 5.6v difference right after charging. Why the...

I think you're exaggerating a bit there... The cassette on my Marlin 8 is a SRAM PG-1210 Eagle 11-50T, 12 speed. They are around $50-$100 which isn't a big deal every year or two if you even put that many miles on it. It's considered routine maintenance when you run a motor like the Photon in...

Cassettes and chains are pretty cheap the last time I checked… gotta pay to play and it’s a very small cost every few hundred miles which takes most of us a long time to reach.

Pretty sure literally none of those will fit in my frame.

I've heard good things about the Satiator but you're limited to 360 watts or just over 6 Amps if your pack is 52v (58.8v fully charged at 4.2v/cell). You take wattage and divide by voltage to get the max amps it will put out at any set voltage. As for the BMS, I only use JBD on my current...

Yes, the idea is that the BMS handles the balancing, at least the JBD BMS units I use do and have bluetooth to monitor individual cell voltages. Sometimes smart LiPo chargers can balance quicker (or slower) but it all depends on your charger and the BMS. The Riden Power Supply I linked has a...

Did you ever finish this project? Did you end up doing a fork upgrade?