"enable rt data" on your cell phone will record all values that can be recorded, including your GPS from your phone.
Using VESC Express with enabled "GNSS" will only log if your external GPS module, being connected to your EXPRESS, has a GPS Signal.
The problem with the gray line is well known. It is simply an incorrect representation that is offset in time. The values at that moment correspond to each other.
Hello all,
I started my own business yesterday. It will be an offer for private persons and companies being first time users in the VESC® world and advanced users too.
My consulting services include:
-selection of the correct type of motor controller for the desired purpose of use...
If you remove the plate on the motor you can see it. Its a 5 minute work.
yellow:Hall A
green:Hall B
grey: Hall C
white: GND
brown: +5V
There is no temperature sensor on the motor. I added one on the windings. I am using the motor with Vesc 100/250.
Selling here a used MGM controller, which was only briefly in use.
The controller is fully functional.
As equipment it has some options.
Special feature is the possibility to connect motors with Hall sensors, an external MOSFET temperature sensor and extended inputs and outputs, CAN, etc.
The...
Selling here a used MGM controller "TMM 80063-3 X2 Series PROFI" which was only briefly in use.
The controller is fully functional and was operated with a maximum of 13KW peak.
As equipment it has the options: OPTO, SE, BC, WR, FANS
Special feature is the possibility to connect motors with hall...
Selling my shortly used Vesc 75 300 for 510€.
At the moment you pay over 650€ incl. shipping, VAT etc. in EU and the VESC from Trampa is at the moment without an bluetoothmodule, which this VESC has.
It was used for testing of a motor for 2 hours. It´s fully working.
Shipping from germany.
These are pictures of my selfmade battery for my EM Escape 2019.
It’s a 20S 48Ah battery with Samsung 40T Cells in 12P configuration spot welded in sandwich style 0,2mm copper and 0,15mm nickelstrip.
110J on the kWeld but I had to spot weld twice the same place while cross swapping the...