Recent content by abecrizer

I think it will work, BUT I would recommend getting the LCD so you can change settings to limit the watts to the motor and set the correct P value (I guess 160 is it according to D8veh). I believe that NOT doing those 2 things contributed to me stripping the gears in the same motor.

Yes. See what I said, and what the smarter people said here: https://endless-sphere.com/forums/viewtopic.php?f=2&t=84101 I am really intrested in your mid drive set up and how it turns out. I was considering something similar, I was just going to put the smallest chainring I could onto the...

Ok, I realize my words are really confusing. Here are some pictures. It was a pain getting the holes to align right. I just wiggled the drill around to make it wider if I didnt get it right. I guess you could lay some paper on there and punch holes in it as template, I didnt think of it at...

Yes that side does unscrew. You take the screws out of it (the connect the shell to the freewheel inside). I drilled 3 holes to match the same patter in a piece of wood, with a large hole in the center for the axle. Then I put 3 bolts of the same thread through the holes I made into the body...

Yes indeed but that being said: When I contacted them at the first time (the sales person I bought the kit from at first) I was clear that I would order more stuff if they could help with the parts, and I got no response what so ever to that one. When I sent the email which finally got me the...

Well the shipping was $68 USD, no transaction fee. But that was for a motor and several sundry items little hidden wire brake sensors, PAS sensor, throttle AND the gears, all told $184 of other stuff. The motor itself is fairly dense after all.

Yeah $20 per set, pretty expensive actually considering a new motor is less than $100, but I consider it a reasonable fee for tracking down something that is apparently a weird part.

At long last I got my gears. I emailed the Aekema folks, one response, then nothing. Emailed the original sales person at BMS battery who sold me the stuff. No response. I would much prefer to hear NO than to feel ignored, though I must give every one who responded even once credit for being...

I did finally get gears from BMS battery, $20 USD plus shipping per set. The fit fine. I was difficult getting anyone to respond, then when I finally did it took about 2 months. Details on the post about that.

Ok so maybe persistence paid off. Aikema never emailed me back after the initial one I mentioned. The person at BMS battery I bought the stuff through never emailed me back either. I emailed the general BMS batter contact and got a response from a different sales person. The looked into it...

Need some advice, I emailed Aikema with a brief text and the picture with measurements attached below, they emailed back next time the sun was up in their time zone. I was really suprised impressed by the quick turn around. The message was brief: "Dear Eric, Where do you come from?Where you...

I emailed Aikema. Will post what I hear.

Ykick, how did you find that website? I searched for the Cute and Tongxin Cute a ton and never found anything.

Thanks so much for the Aikema info! Although it would be best not to make to many inferences from email with a language barrier as well but when I emails BMS battery asking for gears it seemed like the attitude was "We don't make money selling cheap gears." I haven't even emailed them because...

Bascially I changed my P1 to 160, and I went to test the thing out. I mistakenly believed that with the p1 @ 160, the controller motor mismatch (motor rated to 200 W, cotroller rate to 250w) was not on issue. In order to test and see if the P1 was corrected I applied full throttle to the wheel...