Recent content by Aeron

Great, thank you :bigthumb:. I was thinking this would be the same for the display as well, thanks for the clarification.

Hi ! After little over a year of use (and 1.7k km) whitout any troubles, I decided to check on updates for this little wonder of a controller. What's unclear to me is whether or not I should apply each and every one of the updates or if the last one is enough. In other words : are the update...

Can you tell us more about this cable and the programming process ? The existence of this cable was mentionned in the thread earlier but nothing more. The only thing holding me back for this motor is the lack of assist settings (adjust sensitivity to cadence and torque sensors).

On the diagram, connectors are seen "from the front" (ie looking from the side where they interact with each other). Red = +5V Black = GND White = Temperature sensor Others = hall sensor (Hope I answer your question bc I'm not sure what you meant :) )

I have one on my build. It's definitely a hall (opened it to extend the wires). Runs perfect with a NCY throttle.

I'm really happy with this controller. Really good stuff. I was a bit overwhelmed by all the settings at first, but taking my time and reading the wiki I managed to get it working without burning anything (yet). This is my first ebike/controller. I still have a lot to understand before I can...

Did anyone test this motor with a SW102 display (for Bafang BBS line) ?

While I agree with (most of) what you said, wasn't it clear that it was an option ? It's probably not the best place to have the "potting or not potting" debate. While we're at it, it's not a good idea for the rest of the bike...

It's a great idea, plus those bottles are available empty if you want to avoid the hassle of emptying them ! I've used Shoe Goo to repair shoes, and it hardens quite a bit after a time (like a rubber sole hard), so it kinda makes sense ! You could make your own plugs with some sort of wick...

:bigthumb: Never felt better than when I first laced and trued a wheel (~2 weeks ago). Now I know I don't need anyone to make wheel decently true, and won't have the kind of remarks you did.

I think what matte2k meant was "torque sensing" was not up to the TSDZ2 strandard ?

I don't have a good understanding of the electronics behind LVC so I thought it would be a good idea to ask first. If I were using a lower voltage, I guess I'd still be in the mesurement range of the LVC circuit. But when overvolting, isn't there a risk of falling out of that range and saturate...

Noone knows ?

I have quite the same question but the other way around : I have a 36/48V version, but I want to run it at 52V. The FETs and caps were changed to their 80V counterparts to accomodate higher voltage (and I am thinking about changing the LM317 regulator*), but is there any hardware modification to...

I'm looking for a reliable BB-mountable, torque sensing, 52V compatible motor, and this motor seems to tick those boxes (I was considering the TSDZ2 but the reliability seems not optimal to me). Is there any evolution regarding the whole flashing/programming side of things ? I mean, is there...