Recent content by andrewrich

its a mid drive with 6.1 gear reduction.

yeah its already on newest firmware and display. but another person i asked just uploaded there config file for me fromk there cyclone and now my problem is fixed, i also set dci ki to 100 in that set up just incase. i think the problem was i had put the pole count at 24. as on the phase-runner...

yeah its already on newest firmware and display. but another person i asked just uploaded there config file for me fromk there cyclone and now my problem is fixed, i also set dci ki to 100 in that set up just incase. i think the problem was i had put the pole count at 24. as on the phase-runner...

thank you for the correct setting location i will let you know once i have checked it and if it worked tonight when i get home.

i set poles to 24, i have not done any updates as i only got the controller yesterday i did not think it would need updating with it being brand new ? does it still need updating ?.. will check ki setting later when i get home

Hello I was just wondering if I could get a little help. I just purchased a Nucular 6f and got it all set up today and so far am very impressed but have a slight problem. I am using a cyclone 3000w motor and 72v battery and the controller is in FOC mode with hall start. the problem is when I...

its already in FOC Mode. any other ideas?

Hello all I was just wondering if I could get a little help. I just purchased a Nucular 6f and got it all set up today. I am using a cyclone 3000w motor and 72v battery. the problem is when I start to pull away the motor stutters, it only happens on very low throttle. is there some setting...

ok so just checked with load on the motor and it works great, i thought if it wasn't working without load then it wouldn't with load but i guess that's not the case. anyway you can ignore my post as the problem is now fixed. ps: thanks for mentioning to try with load on the bike.

I am running on 5 volts i think as i have not done any rewiring to the harness, the only thing i changed was rated system power from 48v to 72v and in dev screen i turned on option for bottom bracket motor with variable gears on, but yeah my halls work fine its just the field weakening that's...

before: After: cyclone 3000w, phaserunner, 72v homemade battery and case, home made motor mount. 55 mph top speed.

hello all this is my first post and i am wondering if anyone can help me out. I recently bought a phase runner v3 and I have hooked it up to a 72 volt battery and a cyclone 3000w motor. I did the auto tune and all was ok even the hall was ok which was a surprise because I had heard people had...