Recent content by Andy_L

Thanks, I will message then and see if they are expecting any kcaps in as well. Also got a big order on the way from nkon. Enough cells for 2x 14s4p packs plus spares, skyrc mc3000 as I wanted a decent cell charger and tape, cell caps etc etc. Although I did think I should have got the vp4...

Damn Boris/Brexit, UK reseller is out of stock and doesnt have the KCap, case or spare electrodes I was going to order so thought I would go order direct and face the import duty but sadly no option for UK and found the reason in an old post from a few months ago. :( :pancake:

Having the usual KWeld vs Maletrics debate in my head and suspect I will go KWeld as I like buying lab toys but that is not my question... I have a lot to get one with doing two OSF TSDZ2 builds and custom batteries so the quickests and easiest route seems to be go with a recommended 3s lipo...

is this quite common? The ANT BMS was on my list of potentials

yes you are right, I am used to seeing cells without insulation but for an application I cannot discuss and my job was to protect the rest of the vehicle against thermal runaway of a lot of cells (which I did) but it would not take much to have an accident when putting this pack together...

any thoughts on these:: https://eu.nkon.nl/lg-inr21700-m50-4850mah-7-3a-no.html?gclid=CjwKCAjwnPOEBhA0EiwA609ReeAGdJvzqnoDzzyOUFtOM_AxuLNXxckuemydoixp3KYLIaeD9CfagBoCU_gQAvD_BwE low discharge but at 3P and 15A I would be running each cell at around 2/3rds it's max. No heatshrink doesnt concern...

thanks fatty, I will take a look at those now and look at the packaging in my planned "enclosure" and space. i did just see NKON has refurbished MJ1's coming back in stock for 3.10 euro + import/vat etc but unsure about cells that have been dismantled in case they were bad or got mechanically...

Apologies for another recommendations thread but am looking for help given the current state of the market. I am looking to build 2 packs into custom shapes to fit 2 bikes I am currently converting using TSDZ2's. My requirements are: Motor: 48V, 750W TSDZ2 running OSF with SW102 and no...

Hi, been reading lots of threads on here for the past week and learnt a lot but thought I would post up my problem for some help. I am building some equipment for my home workshop and have been stuck by needing a 3 phase industrial motor up to 10kW but without 3 phase this is not going to...