Recent content by bionx 1954

Sold

Bump still available

I purchased this 9c rh212 complete 26 in rear wheel Grin assembled it motor 9c rh 212 fast wind spokes sapin strong rim alex dm24 rim brake compatible I have had it in storage 3 years low km 2000, I disassembled it cleaned and varnished rotor/stator. Thread axle good, sensors, and cable...

PRICE DROP 225.00 CDN

Grin RH 212 9 C fast wind, no statorade Sapin 14/13g Alex DM 21 like new used only 200 kms rim true axle thread /cable excellent condition Assembled by Grin Located in Ottawa , Ontario , Canada prefer local pickup will ship (Canada only ) (buyer pays shipping cost) 225.00 cdn

A similar New Infineon controller from Grin Ebike .ca list at 185.00 usd for a 36-72@40A , New c/a are 80-100 usd. There is a market for used Ebike .ca products Controller /Cycle Analyst / lights.

I built this bike this winter 90 % of build is new parts 26 in tires, large frame. Brand new parts are front wheel, tires, crank set, controller , display , rear wheel ( alex dm24 rim , Sapin strong spokes). . Motor is 9C RH212 . Avid rear disc brake, Kool Stop front rim brakes. Kona P2 forks...

Here is my Norton with a Board Track Racer influence

Before Firmstrong 26 in Beach Cruiser After Norton Commando Replica E Bike

Hi Thanks Yes I am a " snowbird" and have been enjoying Florida for 10 years now. I really enjoy the many Rail to Trails system , and have ebiked almost all the Florida trails. I'm leaving in 2 weeks for Florida . Anxious to ride my new toy.

Hi I had a Norton Commando when I was 16. So 50 years later I built another. Parts Firmstrong beach cruiser 26 in fixie 9c 2706 Grin front motor Grin 40 a controller Battery Bosch Core 18v 8A X 4 36V@16A or 72V@8A Cycle Analyst 2.4 I was trying to make it in the retro style, with a Board...

I have been using the 36v split packs for a long time as shown in your wiring diagram with no problem .I have 2 36v bosch 12A packs ( 6x 36v@4A Bosch bat 838 ) I use a 72v grin satiator to charge them. I usually charge the 36v pack together at 40.7 v @ 5A , or series the packs and use...

I'm also have been using KS Ebike pads on rear and really has impressive stopping and have about 2000 km and pad is only slightly worn. Original KS pads worn out before 2000 km.

I have 2 36v packs that terminate into a Anderson plug that has 4 connector . I then have a matching 4 connector Anderson plug that series the two 36v packs to 72v that goes to the controller . I made a charge plug that plugs into the 36v packs that parallels the 2 packs to one ...

Hi I have the 72v 5A satiator with 2 36v Bosch battery packs each 12 A. I normally charge them in at 36v@ 5A ( 180watts/hr.)if I am not in a rush. When on the road and need a fast charge I series the 36 v packs and charge at 72V @ 5A (360 watts/hr.)