Recent content by bluem6

I've just purchase the same controller, do you have the bluetooth app by chance?

I am happy to report that I've found the pins. Thank you very much for all the help. I was able to open up the old controller that I had and trace the "EABS" wire...and luckily the controller almost look identical. If someone has this same controller the pin you want to look for is "X" and...

Here's the translation using google translate: "Two rounds of Black and Orange 12-16 tube xxx-steel plug connection"

I've tried opening it up but can't find anything that look like "regen"....here are some photos.

I have drum brakes on my trike and don't know if that will be good enough moving at 28mph now... Is there a 48-72V controller that you would recommend?

Ah, got it...so it look like I am out of luck with this controller then. I swap out my original 48V controller with this one and look like I might need to swap it back... Sorry, meant to say it's a gearless hub motor... I'll upload a picture of the box and the instructions and see if you can...

Shoot, I was afraid of that....that the controller does not have that feature. I did try the "high" wire however I hook it up to a 3S (11.1V) and that does the same just cut the power to the motor. It's a brushless hub motor so I can't try the gear thing. I'll try again tonight with a higher...

I am looking for some assistance with wiring the controller. I swap out a 48V to this one but I cannot get the "low brake" to work. It does cut power to the motor but does not apply the 'brake' to slow down the motor. Any help would be greatly appreciated, thanks. Link to 2000W 48-72V...

Hi, just want to double check regarding the "high brake". Does the one wire go to positive 12v? If so do I need a 12v step down converter?

Hi, I've just purchase and install the xld 48v/1000w controller and need some assistance. Everything wire up, tested and working however when I do full throttle within a few second the controller shut off completely. The only way to power it on is to unplug the battery and plugging it in...