Recent content by Brushlessboy16

+1 to Hill hater Output shaft diameter Input shaft configureation Thanks!

Well thank you for the help, might be better to sell it off then instead of having a high dollar paper weight :)

see this post 680uf 50v edit- A not to Fizzit. The no spark adapter is not compatible with castle esc's. the fluxuating voltage upon start up is not kosher with the main processor startup.. Best option would be to go to a set of tiny 2mm bullet connectors as sacrificial connectors instead of...

Thanks matt. Im pm'ing back and forth with Patrick trying to get an answer if I can purchase just a Hv air logic board or somehow retrofit the software to the hydra. But im trading my sponsor (who is building a brushed electric dirtbike) A dirtbike that I got for free with a seized engine...

Tommorow Im picking up my Castle Creations Hydra hv180 speed controller. I know that the sensorless controllers have a tough time at startup and with surging. On the rc forum I frequent the president of castle creations (patrick del castillo) is a frequent poster. He thinks that the esc will be...

Depending on your input voltage This unit is good for 10s Lipo input http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10313 Very cheap site and they have many warehouses around the globe :)

Try changing the deadband on the esc with the castle link.. i think you already know how to do that :)

Even better news fellas! Been chatting with my rc sponsor. Hes working on building an electric dirtbike, and I had a blown up yamaha yz85 dirtbike that Im going to trade him for a Castle creations HV 180 esc! 400 dollar controller for a dirtbike that didnt have a future! Seems very easy to...

I am Also am trying to decipher all of the markings and wire colors So far I have Yellow, green, blue are phase wires Large red and black wires are main power wires Small red,yellow, green,blue and black are hall effect sensors Along the right side of the controller. Green w/Yellow stripe...

Thank you very much Jeremy. I have been studying(literally) the information on this forum. I think I have figured out what setup im going to run on my e-bike. 80-100 130kv motor -Yes i know that the 80-85 might be smaller and cheaper. But 10 bucks more for a motor with a much higher potential...

Anybody?

Bueller... What are the theoretical rpm limit of the 12fet controllers? Im looking at the turnigy 80-100 130kv on 12s lets say nominal voltage. 3.7v x 12s= 44.4v 44.4 x 130= 5772rpm If my math serves me correct I multiply the motor rpm by the number of poles to find the electrical rpm?

WOW! those pictures came out great. they were taken on my Blackberry cell phone. I pulled apart an old subwoofer amplifier and found these mosfets. Cant find any info on these larger fets: Then there are these little guys in the standard t0-220 package P55NE06's 60v 55amp.

Detailed ESC pics

It has an alumium extruded case just like every other esc.. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220665822955&viewitem=&sspagename=STRK%3AMEWNX%3AIT Says it has a LVC of 42v Have to somehow change it.. Not sure how.. Probably gonna do 10-12s