Recent content by Cristian

I did not apply much thermal paste, i have the same concern. I think the thermal pads are doing most of the work, by transferring heat to the case. The case seems more hot now than before, related to the temperature shown on the display. I checked it with a laser temp gun and the case...

I forgot to mention that i have a 48V motor with a 48V 17.5Ah battery.

I'm happy to report that i have made all the cooling modifications that are listed on the wiki page, except the one with plastic cover cutting. I have tried as hard as i could to make it overheat, going uphill (800W-900W) or on the flat with 45km/h and 500-600W continuous power, but i only...

Yes, now i see that the clutch bearing is the problem. I took down the spider with the chain rings and i attached the screws directly to it. It has a lot of play. I will have to find a replacement somehow.

You should put 1 or 2 layers of inner tube between the frame and the metal part pressing against it. Ok, i it seems that the clutch bearing is fine. I removed every part of the motor, greased everything, but when i closed it up and put back the spider with the chain rings (42T and 52T), the...

I opened the motor and it looks like the clutch bearing is causing the play. I have 2300km with the OSF firmware and KT-LCD3. I always ride hard in traffic, so it did take some abuse. I will replace the bearing, do the motor temperature dissipation mods and switch to the 850C display. Too bad i...

Does anyone know what is causing play in the axle?

I searched around, but i can't find much about play in the axle. It started today, it's about 1-2mm of play. What is the cause? What do i have to replace?

I just received a 850C display from PSWPower today. I ordered it 1 week ago. You should be good to order.

Does anyone know how much of a difference is there between having a 48V battery vs a 52V battery with the TSDZ2 with OSF? Is the increased voltage noticeable for the user? I noticed when the battery is about 50% the max speed is a bit lower and you have to pedal a bit harder to maintain a...

I had no idea they would do this. I figured i wouldn't need the brake levers, so why order the kit with them. I already ordered a 8-pin 48V controller, so i will have to wait for it to arrive, then get things sorted out. Thank you. Do they ship from the EU? I see they have hugely overpriced...

A short heads up regarding the battery stock in the EU. I spoke with UnitPackPower and they said that the corona virus is making imports difficult. I'm still waiting for a 52V 17.5Ah battery pack. Meanwhile, does anyone else have a different choice on batteries, 52V preferably? I just ordered a...

No, it ain't broke. But I still have to get another display for my wife's bike to run OSF. So I was wondering if I should get the 850C or would a KT-LCD3 be enough. But I guess I will be giving the LCD3 to my wife, she will be pretty happy with it and I'll get a 850C.

Does anyone know where i can buy a 52v battery in the EU? I have TSDZ2 with OSF running 48v and i want to upgrade to 52V and leave the 48V battery for my wife's bike, which will is also getting a TSDZ2 with OSF. Should i upgrade to the 850C? Is it worth the cost? I'm on KT-LCD3 for 1 year and...

Seems like the 3rd time the motor controller broke. That could be due to the max power (more likely related to the high current running) been ran all the time through it. The first thing i would do is order a new controller and then test.