Hi,
I have a Kelly KBL72301 Controller.
I've changed several times the configuration of the controller until now: The red and green led lights up continuously and i'm not able to connect to the controller any more.
Have i turned it into a useless brick or is there any possibility to get the...
Last week i had a longer call with another TÜV egineer.
He gave me some hints, which the topic is related to.
- First of all, there is the TÜV Merkblatt 764. It is the groundwork for all conversations.
- ECE R 100
- ECE R 10
I told him, that i've read about conversations before 10/2002...
Hi,
I have an old Vespa V50 smallframe and I want it to convert to electric.
To getting it legal, I already talked with a local MOT / TÜV engineer.
He said, mechanical there would be no problem, but he want to have a EMV test certificate.
I've read in this forum about similar conversations...
Hi,
i'm thinking about what would the best connection method to connect the cable to the battery nickel strips.
Three methods are in my mind:
1. Soldering. Not so easy on thick cables and nickel strips are not so easy to solder. See example, my iron has to less power for the AWG8 cable.
2...
I also have a heat gun and I think, this might be no problem to solder the cable to the nickel strip.
I didn't understand your comment, the pack should be a power supply for my kweld instead of the heavy lead acid battery.
BW
Hi,
I have some A123 anr26650m1a cells leftover. I want to build a 12s3p power supply for my kweld.
This is my design, I ended up with:
The H-Nickel strips are 10 mm x 0.15 and the bus bar strips out of 8 mm x 0.3.
I want to solder a AWG8 cabel to the bus bars.
Are there any...
Hi,
thanks a lot to the work of @mcc. I've ported to code to an esp32.
I had some pcbs left of the TSDZ2 Project of @mspider. He developed a small PCB with an esp32 for TSDZ2 mid drives. Details can be found here:
https://github.com/TSDZ2-ESP32.
It works the same way as the project of @mcc...
Hi,
maybe the wrong place here to ask: I've flashed the bootloader to the nrf52 as described by @casainho here:
https://opensourceebike.github.io/bootloader.html
My question is, is it able to restore the default bootloader and firmware of the nrf52 Dongel?
Thanks!
BW
Ok, now everything is working. I thought, that the esp32 is able to enable the motor via GPIO, but after reading the schematics, i've checked that the voltage regulator XL7005A is enabled via the display on.
If i power VBatt and PW_EN everything works fine.
I think in the next days i will...