Recent content by Dirty-Kurty

I still got the same problem with the stock chain even with removing 2 links so need to order the CZ chain. Is it really 10m for 46,00€ 😯?

Merci beaucoup ! Its solved the problem :) :)

I will try it and report if it helps

I have exactly the same Problem. I try to short the chain... I hope it works

Thanks tor eddy and Joe ! I thought the same but its a new tensioner with a longer screw. You mean the screw from the old tensioner is bent. I have all parts and spacer you got just with a longer screw. How do you build the tensioner in again ? With all tighten up or a bit Space?

I had the bicycle upside down, thats a bit confusing. It looks exact like my Position.

Yeah i mean the freewheel just used the word. If the chain has some tension it doesnt wobble but it doesn't move clean. I have like 2-3 mm wobble... I took of the wheel but the problem was before and I doublechecked this first. If I throttle in Mode 3 the chain moves a Lot up and down, it...

Thanks for the answer :) -checked the chain (no stiff links and well oiled) - the tensioner is brand new - the front sprocket looks good In my opinion - the problem is even without load (So i think not a Suspension problem) the rear cog is clean and I checked every single screw -> in the...

Has anyone an idea how to fix the chain rattle and jumping tensioner? It starts 2 weeks ago and I thought it is a Bad tensioner cause the chain line is not clean. I ordered a new one and built it in but its still the same Problem. If I throttle in Mode 2 the chain starts to rattle and the...

I need your help. Today i rode my lmx in the rain and the Display just began to turn off :( . I think some water came Into it but I thought it is no Problem for it? I dryed it it on the heating but it still just shows the background light without textures... what can I do except of buying a new...

Yeeess Thanks adam ! Didn't thought about it.

On the first picture you might see a 1cm Space between the slider and the cablehole. I want to drill some holes in the slider to fit it close to tge cablehole without squizing the cable.

Sorry had a Lot of Stuff to do. If you have questions pls ask

I got a Jumbo-Pack from Em3ev and it doesn't fit well, but it fits. I shorted the wire and put the xt90 connector under the motor, (where the controller is). But i still need 1 more centimeter to use lock it with the key. I will make some photos later to make it understandable. Ps: sorry for my...

Btw my bike is complete now My partlist: battery: 52v 14,8 AH (14S5P) 30q cells from Em3ev --> enough for 3000 watt peak :bolt: front suspension: Rock Shox Totem RC2 --> I love that baby rear suspension: Fox float CTD Tires: Schwalbe Magic Mary brakes: Magura MT5 derailleur / switcher ...