Recent content by dom48

That's a real bummer that the TS didn't work for you tomjasz. I'm loving mine so far and just completed my first commute to work with it. The display programming does leave something to be desired but once you learn which buttons to push and for how long, changing settings is pretty easy. I...

Had time for a quick test run and confirmed that with magnet setting on 2 and wheel diameter set to maximum setting of 30, the odo/trip was only 7% lower than actual. However current speed display was still very low, at 15 mph the vlcd5 displayed 10mph, at 20mph the vlcd5 displayed 12 mph. Until...

Changing the magnet setting from 1 to 2 made the current speed display very low, for example the vlcd5 showed 8mph vs 22mph actual. This was with wheel diameter set to 26. I'll try increasing the wheel diameter setting while keeping the magnet setting at 2 but I don't think it's likely that the...

I ran multiple tests with different settings for wheel diameter including changes to the wheel magnet (cc) setting. I cycled in an approximately 1 mile test loop and used a Garmin cycle computer for reference. I did not use the Garmin wheel sensor instead relying on GPS for speed and distance. I...

Yes I have the manual. The 700 setting comes after 26 and before 28 so that assumes they really did mean 700c. Anyways, will try the other diameters this evening.

That's a possibility but the odd thing is that it displays the current speed correctly when I'm moving. I'll try the other diameters to see if that is the issue.

Yes, the settings for mph and cc were set correctly to mph and 1. Here are the remainder of the settings: D1=700 6km/h = ON (I don't know what this setting is for) SD = ---- 25mph limit = OFF Amps = 18 I am using the power cutoff brake levers. I dont think that would affect it? The magnet is...

Hello first post here and just wanted to share my conversion. Thanks to all the folks who contributed to this thread, the info has been invaluable! I purchased the 48V 18A motor and 13.5 aH battery from eyebyesickle. His customer service is first class. This is my first e-bike and the goal...