Recent content by doomy

I mean this page, there is also a link to it on the first page. https://github.com/OpenSource-EBike-firmware/Color_LCD/wiki/Bafang-LCD-SW102

A version for BBSHD/BBS02 would be great! BTW, i have the same problems with 0.19.15 (exiting the settings menu shuts down the display, some settings are not stored) Someting else that comes to my mind, i used this tutorial to open the side of the SW102 instead of removing the buttons. I glued...

I tested the TSDZ2_Controller_vM0.16.D_and_TSDZ2_Configurator_Beta_0.2.0 firmware with a VLCD5: When switching to street/offroad mode by pressing the lights/power button 2 times in eco mode it switched between modes (err03/err04) but there was no change and the motor always stopped working over...

Thank you ebikeaus, the pack is working fine other than my icharger that blew up when i first tried to charge my pack. So now i'm charging it in parallel with my IMAX B8 charger with cheali firmware installed. It takes a long time at only 5A so maybe i will invest in a bulk charger and only...

Finishing touches:

Yesterday i contuinued with the build, the spot welding came out nice. I had some problems soldering the power leads. My soldering iron is 65w and its not enough to quickly solder the AWG 12 cables to the nickel. I have ordered a 100w iron now and will try with this one.

I just glued the triangle pack together with hot glue. I was scared somtimes that the nozzle could burn trough the insulation when i glued the strips in the jig. This was luckily not the case tough. The hot glue gets hard very fast and when i tried to glue the second row to the first row it was...

Hello everyone, This is going to be my first Pack and it would be great if you could give me some input on how i can improve it. I plan on using it with a BBSHD motor so max 30A current draw. My Cells are recycled Sanyo NCR18650GA. The pack will be seperated in 2x7s because i want to balance...