Recent content by Doust72

hello which fuse / circuit breaker I can use to protect a 20s20p battery (72v 60ah) I draw maximum 400A above

You do how I failed you have more details

anyone have an idea how to program the cruise control with the asi 8000/4000/2000 ?

actually it does not work with the halls for the electric brake I used a potentiometer me and it works. I also have the qs 205 engine

Hello someone knows how to activate cruise control with the ASI BAC 2000/4000/8000 ? thank you

https://www.youtube.com/watch?v=vMoQwY5WrwQ

I found a solution to use the electric brake I activate the reverse with a switch and my accelerator becomes an electric brake

I have another question if someone has the answer to this question what is the calculation to do to find these figure circled in red I want to put 84v and 84.5v maximum (for the electric brake) and for the discharge 65v and cut to 63v

UP ???

What does he use as a 3kw charger in your opinion? https://www.youtube.com/watch?v=B1-vh3m6zI8&t=2s

hello i have a question. So with my bac 4000 controller I connected an analog brake on brake 2 as indicated in the asi documentation it works very well but on my bac 8000 I made the same connection and same setting but brake 2 always remains at 4.44v but when I activate the trigger it goes from...

in your opinion you can use the charging coil with all the controller or you have to go through the adapter controller http://adaptto.com/Products/Charging-Coils/

you have the links to buy some I can't find the models you give me or they are not at the right voltage for my battery I have a 72v battery so 84v fully charged

Hello everyone everyone knows a way to recharge a 72v battery with a 2000w-3000w charger or more as light as possible to linteger my bike. I found this if someone has a better idea https://fr.aliexpress.com/item/4000192540976.html?spm=a2g0s.8937460.0.0.3d3a2e0ejfyZjZ if there is a charger...

hello i have a question. So with my bac 4000 controller I connected an analog brake on brake 2 as indicated on your if it works very well on my bac 8000 I made the same connection and same setting but brake 2 always remains at 4.6v when it is connected and when it is plugged in nothing...